HP P9000 Remote Web Console Messages (AV400-96401, October 2011)

Table 65 Error codes (part code 7105) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WCancel the setting where the T-VOL is
used by the other program products, and
then retry the operation.
The command has been rejected
because the FICON(R) Data Migration
source volume is used in the specified
687477105
pair, and T-VOL is used by one of the
following program products:
• Continuous Access Synchronous Z
• Continuous Access Journal Z
• Compatible Flash Copy V2
• Mainframe Array Management
WYou cannot execute the Quick Restore
command with the current pair
configuration.
The Quick Restore command was
rejected because the specified pair was
composed of a Thin Provisioning Z
687507105
volume and a volume other than the Thin
Provisioning Z volume.
WThe SI Operation for FICON(R) Data
Migration cannot be executed in the
The SI Operation for FICON(R) Data
Migration failed because the specified
687677105
current pair configuration. Specifypair consisted of an S-VOL other than a
FICON(R) Data Migration source volumeFICON(R) Data Migration Source
for S-VOL, and specify volumes otherVolume, or a T-VOL that is a FICON(R)
Data Migration Source Volume. than FICON(R) Data Migration source
volume for T-VOL.
WThe SI Operation for FICON(R) Data
Migration cannot be executed in the
The SI Operation for FICON(R) Data
Migration failed because the pair status
687687105
current pair status. Change the status ofof the specified pair was not SIMPLEX or
DUPLEX. the pair to SIMPLEX or DUPLEX, then retry
the operation.
WThe SI Operation for FICON(R) Data
Migration cannot be executed in the
The SI Operation for FICON(R) Data
Migration failed because the pair status
687697105
current pair status. Change the status ofof the specified pair was not
Suspend(Mig.). the pair to Suspend(Mig.), then retry the
operation.
WRelease the Cache Residency Z setting
in the T-VOL.
The SI Operation for FICON(R) Data
Migration failed because the Cache
687707105
Residency Z setting was set in the T-VOL
of the specified pair.
WRelease the Volume Retention setting in
the T-VOL or specify another volume, and
then retry the operation.
The SI Operation for FICON(R) Data
Migration failed because the Volume
Retention setting was set in the T-VOL of
the specified pair.
687717105
WDelete the Continuous Access Journal Z
pair or specify another volume, and then
retry the operation.
The SI Operation for FICON(R) Data
Migration failed because the T-VOL of
the specified pair was used by
Continuous Access Journal Z.
687727105
WDelete the Continuous Access
Synchronous Z pair or specify another
volume, and then retry the operation.
The SI Operation for FICON(R) Data
Migration failed because the T-VOL of
the specified pair was used by
Continuous Access Synchronous Z.
687737105
WExternal Storage volume cannot be used
as a T-VOL. Specify another volume.
The SI Operation for FICON(R) Data
Migration failed because the T-VOL of
687747105
the specified pair was used by External
Storage.
WThe specified operation cannot be
executed in the current pair
The command has been rejected
because the S-VOL of the specified pair
687757105
Part code 7105 275