HP P9000 Remote Web Console Messages (AV400-96401, October 2011)

Table 65 Error codes (part code 7105) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WRelease the journal volume setting or
specify another volume.
The operation failed, because the
specified S-VOL was a journal volume.
585337105
WRelease the journal volume setting or
specify another volume.
The operation failed, because the
specified T-VOL was a journal volume.
585347105
WRelease the journal volume setting or
specify another volume.
The reserve volume setting failed
because the specified volume was a
journal volume.
585357105
WCheck the requirements for using the
volume with Continuous Access Journal
Z.
The operation failed because the
specified T-VOL was a data volume of
Continuous Access Journal Z.
585367105
EIf this problem persists, please contact
HP Technical Support.
An error occurred on the DKC side.585727105
ECheck if the DKCMAIN and SVP
microcode versions are mismatched.
This function is not supported.585737105
EIf this problem persists, please contact
HP Technical Support.
An error occurred while connecting to
the subsystem.
585757105
WVolumes that do not belong to CU group
0 are currently not supported. Specify
another volume.
The operation failed because the CU
group of the specified volume is not
supported.
585857105
WThe command cannot be executed in the
current status of Continuous Access
Journal Z pair.
The operation failed because the
specified S-VOL was used by Delta
resync of Continuous Access Journal Z.
586307105
See the section "Sharing Business Copy
Z volumes" in the HP P9000 Business
Copy for Mainframe Systems User Guide
for the relation between the state of
Continuous Access Journal Z pair and
the Business Copy Z operations.
WThe P-VOL of Continuous Access Journal
Z pair for Delta resync cannot be
The operation failed because the
specified T-VOL was used by Delta
resync of Continuous Access Journal Z.
586317105
specified as S-VOL. Specify another
volume.
WThe P-VOL of Continuous Access Journal
Z pair for Delta resync cannot be
specified as a reserved volume.
The reserve volume setting failed
because the specified volume was used
by Delta resync of Continuous Access
Journal Z.
586327105
Specify another volume.
WRetry the operation after the Quick
Format has completed.
The command has been rejected,
because Quick Format is performed on
the specified S-VOL.
687437105
WRetry the operation after the Quick
Format has completed.
The command has been rejected,
because Quick Format is performed on
the specified T-VOL.
687447105
WFICON(R) Data Migration source volume
cannot be used as a T-VOL. Use other
volumes.
FICON(R) Data Migration Source Volume
is specified as a T-VOL. FICON(R) Data
Migration Source Volume cannot be used
as a T-VOL.
687457105
WThe specified pair cannot be operated
because the pair uses FICON(R) Data
Migration source volume.
The command has been rejected
because the pair uses FICON(R) Data
Migration Source Volume.
687467105
274 Message (part code group 7nnn)