HP P9000 Remote Web Console Messages (AV400-96401, October 2011)

Table 65 Error codes (part code 7105) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WWithdraw the Compatible FlashCopy
relationship.
The command has been rejected,
because the Compatible FlashCopy
relationship exists.
89917105
EInstall additional shared memory.The command has been rejected,
because sufficient amount of shared
memory is not installed.
89927105
ESet the shared memory extension setting
for Compatible FlashCopy.
The command has been rejected,
because the shared memory is not set
for Compatible FlashCopy.
89937105
WWait a while, and retry the operation.The command has been rejected,
because the disk subsystem is busy.
89947105
WWithdraw the Compatible FlashCopy
relationship.
The command has been rejected,
because the Compatible FlashCopy
relationship exists.
89957105
WWait a while, and retry the operation.The command has been rejected,
because the disk subsystem is busy.
89967105
WUse the Reverse Resync option.Quick Restore cannot be executed
because the specified pair is composed
556457105
of the external volumes with different
cache mode settings.
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
563017105
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
563027105
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
563037105
EPlease contact HP Technical Support.This function cannot be used by the
storage partition administrator.
565247105
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
571017105
WSelect a different volume or release the
consistency group setting.
The command has been rejected
because the cascade request for creating
580007105
cascade pairs composed of volumes
belonging to the same consistency group
was issued.
WWait until the L1 pair status changes to
Split, then retry the operation.
The Add Pair command for adding the
L2 pair has been rejected because the
L1 pair is in V-Split status.
580017105
WQuick restore operation cannot be
performed when the pair is composed
The Quick Restore command has been
rejected because the specified pair is
580027105
of a normal volume and a customized
volume (CV). Select a different pair.
composed of a normal volume and a
customized volume (CV).
WTo continue the operation, delete the
Remote Copy pair.
The command has been rejected
because a Remote Copy pair exists in
the same storage system.
580037105
WThe requested operation cannot be
performed. Check the status of the
specified volume.
The command has been rejected
because the issued request is an
operation that cannot be performed with
580047105
a volume that can be used from either
the mainframe or open-system hosts.
272 Message (part code group 7nnn)