HP P9000 Remote Web Console Messages (AV400-96401, October 2011)

Table 65 Error codes (part code 7105) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WCheck the specified volume number.Because the boot device is the T-VOL in
the Delete Pair command, the flag does
not match.
86497105
WCheck the specified volume number.The boot device and the S-VOL do not
match in the Add Pair, Resync, or Delete
Pair command.
86507105
WCheck the contents, and then retry.The SSID is invalid.86517105
WCheck the target volume number.The boot device is not an S-VOL nor
T-VOL.
86527105
WCheck the target volume number.Because the boot device is the S-VOL in
the Delete Pair command, the flag does
not match.
86537105
WCheck the target volume number.The boot device and the T-VOL do not
match in the Add Pair, Resync, or Delete
Pair command.
86547105
WCheck the contents, and then retry the
operation.
An invalid secondary SSID is specified
in the Add Pair or Resync command.
86557105
WCheck the contents, and then retry.An invalid secondary SSID is specified
for the Delete Pair or Split Pair
command.
86567105
WPlease contact HP Technical Support.The Swap&Freeze option cannot be
specified, because the mode 80 is on.
86577105
WRelease the relationship to delete the
Compatible FlashCopy pair, or specify
another volume.
The command has been rejected,
because the specified S-VOL is being
used as the T-VOL of a Compatible
86967105
FlashCopy pair or a Compatible
FlashCopy SE pair.
WRelease the relationship to delete the
Compatible FlashCopy pair, or specify
another volume.
The command has been rejected,
because the specified S-VOL is being
used as the T-VOL of a Compatible
86977105
FlashCopy pair or a Compatible
FlashCopy SE pair.
WRelease the relationship to delete the
Compatible FlashCopy pair, or specify
another volume.
The command has been rejected,
because the specified S-VOL is being
used as the T-VOL of a Compatible
86987105
FlashCopy pair or a Compatible
FlashCopy SE pair.
WRelease the relationship to delete the
Compatible FlashCopy pair.
The command of Reverse Copy or Quick
Restore has been rejected, because the
86997105
specified S-VOL is being shared with the
volume of a Compatible FlashCopy pair
or a Compatible FlashCopy SE pair.
WCorrect the specified CT Group and retry
the operation again.
The command was rejected because the
specified CT Group is already used.
89417105
WInstall the appropriate version of DKC
microcode.
The CT Group operation is not available
because the target DKC microcode
89427105
version does not support the CT Group
operation.
WReset the Split time of Consistency Group
from the mainframe host.
A pair status cannot be changed
because the Split time of Consistency
Group is set.
89467105
Part code 7105 271