HP P9000 Remote Web Console Messages (AV400-96401, October 2011)

Table 64 Error codes (part code 7010) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WCheck the error code in the Preview list.Some settings could not be applied
normally. Refer to the error code.
86587010
WMount the required PCB, then retry the
operation.
The PCB required for this operation is
not mounted. Check the subsystem
configuration.
86597010
iThe operation ended normally. Execute
the next operation.
The requested operation has completed.90027010
iAn error occurred during the indicated
operation. See the error code for each
operation in the Preview list.
An error occurred. Check the error code.90057010
iTo cancel, click [OK].Do you want to cancel?91017010
iClick [OK] to execute the operation.Do you want to apply?91027010
iTo continue processing, click [OK].
Otherwise, click [Cancel].
The option has been changed. If you
continue processing before applying the
91087010
change, the option will be reset to the
current setting. Do you want to continue
processing?
WTo continue processing, click [OK].
Otherwise, click [Cancel].
Do you want to execute the Initialize
operation?
91107010
iCheck the device emulation and the
definition of the SCSI path.
There are no valid volumes.93037010
WCheck the selected S-VOL.The volume in the pair status is included
in the selected S-VOL.
550037010
WCorrect the number of selected P-VOLs
and S-VOLs.
The number of selected P-VOLs is not
corresponding to the number of selected
S-VOLs.
550047010
WTo continue the operation, click [OK].The CLPR used for the P-VOL differs from
the CLPR used for the S-VOL. Do you
want to continue this operation?
590007010
EClick [Cancel], then please contact HP
Technical Support.
The P-VOL and the S-VOL belong to
different SLPRs. Do you want to continue
this operation?
590487010
EPlease contact HP Technical Support.The P-VOL and the S-VOL belong to
different SLPRs. If you perform this
590697010
operation, the storage partition
administrator will become unable to
operate.
Do you want to continue this operation?
WClick [OK], then continue the operation.Information was updated by other users.
The list will scroll to the top.
661027010
WChange the number of pairs or volumes
displayed in Preview to 16,384 or less.
The maximum number of Pairs or
Volumes that can be displayed in the
665607010
Preview List is 16,384. Change the
number of pairs or volumes that is
displayed in the Preview List to 16,384
or less.
WChange the status of the excluded pair.
Pairsplit operation cannot be executed
Some pairs are excluded from the pairs
to be set, because pairs in invalid status
690257010
262 Message (part code group 7nnn)