HP P9000 Remote Web Console Messages (AV400-96401, October 2011)

Table 62 Error codes (part code 7005) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
composed of the Thin Provisioning
volume and the volumes other than Thin
Provisioning volume.
WQuick Restore cannot be executed in the
current pair configuration. Select a pair
The Quick Restore command has been
rejected, because device information
687557005
where the device information (Inquiry(Inquiry information) of P-VOL and S-VOL
was different in the specified pair. information) is the same, and execute
Quick Restore.
WWait for a while, then retry the
operation.
Quick Restore cannot be executed,
because the configuration is being
687607005
backed up in the target volume. Please
wait for a while, then retry the operation.
WThe operation is not available because
the target volume has capacity changes.
The command has been rejected,
because the specified P-VOL is a Thin
688087005
Check the capacity of the volume and
retry the setting.
Provisioning volume whose capacity is
being added.
WThe operation is not available because
the target volume has capacity changes.
The command has been rejected,
because the specified S-VOL is a Thin
688097005
Check the capacity of the volume and
retry the setting.
Provisioning volume whose capacity is
being added.
WConfirm the capacity of the volume and
retry the setting.
The command has been rejected,
because the specified reserved volume
688107005
is a Thin Provisioning volume whose
capacity is being added.
WDelete the Continuous Access
Synchronous pair or Continuous Access
The Initialize function cannot be
executed, because a Continuous Access
688147005
Journal pair, or External Storage AccessSynchronous pair or a Continuous
Manager pair that is using ThinAccess Journal pair, or a External
Provisioning volumes, then retry the
operation.
Storage Access Manager pair is created
by using Thin Provisioning volumes.
WRelease the pair of Snapshot that is using
the specified P-VOL, then retry the
operation.
The command has been rejected,
because the specified P-VOL is used by
a pair of Snapshot, which is registered
in the CTG.
688357005
WRelease the pair of Snapshot that is using
the specified S-VOL, then retry the
operation.
The command has been rejected,
because the specified S-VOL is used by
a pair of Snapshot, which is registered
in the CTG.
688367005
WWait until the process of discarding zero
data is completed, then retry the
operation.
The command has been rejected,
because the specified P-VOL is a volume
of Thin Provisioning whose zero data is
being discarded.
688377005
WWait until the process of discarding zero
data is completed, then retry the
operation.
The command has been rejected,
because the specified S-VOL is a volume
of Thin Provisioning whose zero data is
being discarded.
688387005
WWait until the process of discarding zero
data is completed, then retry the
operation.
The command has been rejected,
because the specified reserved volume
is a volume of Thin Provisioning whose
zero data is being discarded.
688397005
WSpecify another volume.The command has been rejected,
because the volume specified as P-VOL
is a quorum disk.
688677005
258 Message (part code group 7nnn)