HP P9000 Remote Web Console Messages (AV400-96401, October 2011)

Table 62 Error codes (part code 7005) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
571017005
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
571027005
WSelect a different volume or release the
consistency group setting.
The command has been rejected
because the cascade request for creating
580007005
cascade pairs composed of volumes
belonging to the same consistency group
was issued.
WWait until the L1 pair status changes to
PSUS or PAIR, then retry the operation.
The operation of the L2 pair failed
because the L1 pair was in COPY(SP)
580017005
status, PSUS(SP) status or COPY(RS-R)
status.
WThe quick restore operation cannot be
performed when the pair is composed
The Quick Restore command has been
rejected because the specified pair is
580027005
of a normal volume and a customized
volume (CV). Select a different pair.
composed of a normal volume and a
customized volume (CV).
WTo continue the operation, delete the
remote copy pair.
The command has been rejected
because a Remote Copy pair exists in
the same subsystem frame.
580037005
WThe requested operation cannot be
performed. Check the status of the
specified volume.
The command has been rejected
because the issued request is an
operation that cannot be performed with
580047005
a volume that can be used from either
the mainframe or open-system hosts.
WDelete the Remote Copy pair or execute
the operation by other pairs.
The Quick Restore command has been
rejected, because the specified pair
582597005
contains external volumes, and also is
used as a Remote Copy pair.
WThe requested command cannot be
executed in the current status of
The command has been rejected,
because the specified P-VOL is used as
582607005
Continuous Access Synchronous pair or
External Storage Access Manager pair.
P-VOL of Continuous Access Synchronous
pair or External Storage Access
Manager pair.
See the section about sharing Business
Copy volumes in the HP P9000 Business
Copy User Guide for the relationship
between the state of the Continuous
Access Synchronous pair or External
Storage Access Manager pair and the
Business Copy operations.
WThe requested command cannot be
executed in the current status of
Continuous Access Synchronous pair.
The command has been rejected,
because the specified P-VOL is used as
S-VOL of Continuous Access Synchronous
pair.
582617005
See the section “Sharing Business Copy
volumes” in the HP P9000 Business Copy
User Guide for the relationship between
the state of the Continuous Access
Synchronous pair and the Business Copy
operations.
IAdd sufficient shared memory to create
a pair.
A pair cannot be created because
shared memory for differential tables is
insufficient.
582627005
254 Message (part code group 7nnn)