HP P9000 Remote Web Console Messages (AV400-96401, October 2011)

Table 62 Error codes (part code 7005) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
EPlease contact HP Technical Support.The Swap&Freeze option cannot be
specified, because the mode 80 is on.
86577005
WMatch the number of volumes composing
the LUSE volume you intend to specify
The number of volumes composing the
LUSE volume specified as the P-VOL does
86707005
as the P-VOL and the number of volumesnot match the number of volumes
composing the LUSE volume you intendcomposing the LUSE volume specified as
the S-VOL. to specify as the S-VOL, then retry the
operation.
WCorrect the MU number, then retry the
operation.
The specified MU number is not less than
or equal to 2.
86957005
WWait until the L1 pair status becomes
PSUS, and then execute the operation
for the L2 pair.
Because L1 pair is not PSUS, you cannot
execute operations for L2 pair.
89207005
WYou cannot create a pair using these
volumes.
The command was rejected because you
tried to create a pair using a volume with
552647005
If you want to create a pair by using a
volume without VMA, you must only use
VMA setting by Data Retention and a
volume without VMA setting.
volumes without VMA. If you want to
create a pair by using a volume with
VMA, you must only use volumes with
VMA.
You cannot create a pair with these
volumes.
If you want to create a pair by using a
volume without VMA, you must only use
volumes without VMA. If you want to
create a pair by using a volume with
VMA, you must only use volumes with
VMA.
If you want to create a pair, you must
use the volumes to both of which VMA
is set or not.
You cannot create a pair with these
volumes. If you want to create a pair,
you must use the volumes to both of
which VMA is set or not.
WIncrease the licensed capacity of Open
System Array Management, then retry
the operation.
You cannot create the pair because the
licensed capacity of Open System Array
Management is insufficient.
553017005
WUse the Reverse Resync option.Quick Restore cannot be executed
because the specified pair is composed
556457005
of the external volumes with different
cache mode settings.
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
563017005
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
563027005
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
563037005
EPlease contact HP Technical Support.This function cannot be used by the
storage partition administrator.
565247005
Part code 7005 253