HP P9000 Remote Web Console Messages (AV400-96401, October 2011)

Table 62 Error codes (part code 7005) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WThe S-VOL of Continuous Access
Synchronous or External Storage Access
The command has been rejected,
because the specified volume is used as
86237005
Manager pair cannot be used as a
reserved volume.
S-VOL of Continuous Access Synchronous
or External Storage Access Manager
pair.
Specify another volume.
WConfirm whether the volumes specified
for P-VOL and S-VOL are correct or not.
The command has been rejected,
because there is no pair to be operated.
86247005
WCheck the specified volume number.The P-VOL(S-VOL) and S-VOL(T-VOL)
have the same number.
86257005
WAfter the high-speed Split is completed,
retry the operation.
The SMPL command was rejected,
because the high-speed Split was in
progress.
86267005
WWait until the status of the pair changes
to PSUS.
The Pairresync operation has been
rejected, because pair status is
COPY(SP).
86277005
WWait until the L2 pair status changes to
PSUS, then retry the operation.
The operation of the L1 pair failed
because the L2 pair was in COPY(SP)
status or PSUS(SP) status.
86287005
WCheck the contents, and retry.The status mode specification is invalid.86297005
WCheck the contents, and retry.The status mode type is invalid.86307005
WPlease contact HP Technical Support.The specified CU number is invalid.86317005
EPlease contact HP Technical Support.The timing of issuing the command is
invalid.
86327005
EPlease contact HP Technical Support.The abnormal status is invalid.86337005
WSpecify other volume(s), or release the
Auto LUN Setting.
The volume specified as a reserved
volume is already defined as a reserved
volume for Auto LUN.
86347005
WSpecify other volume(s), or release the
Auto LUN Setting.
The specified P-VOL is defined as a
reserved volume for Auto LUN.
86357005
WSpecify other volume(s), or release the
Auto LUN Setting.
The specified S-VOL is defined as a
reserved volume for Auto LUN.
86367005
WSpecify other volume(s), or release the
Auto LUN setting.
The specified P-VOL is used as a source
volume for Auto LUN.
86377005
WYou cannot execute the specified
operation. Release the Cache Residency
setting for the operation.
The command has been rejected,
because the specified P-VOL is set for
use in Cache Residency.
86387005
WYou cannot execute the specified
operation. Release the Cache Residency
setting for the operation.
The command has been rejected,
because the specified S-VOL is set for
use in Cache Residency.
86397005
WWait until Reverse Copy or Quick
Restore completes.
The command has been rejected,
because the pair sharing the P-VOL was
86407005
in the Reverse Copy or Quick Restore
status.
WWait until Reverse Copy or Quick
Restore completes.
The L1 pairs contain a pair in the
Reverse Copy or Quick Restore status.
86417005
Part code 7005 251