HP P9000 Remote Web Console Messages (AV400-96401, October 2011)

Table 60 Error codes (part code 6805) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WCorrect the setting, then retry. If the same
problem persists despite retrying, please
contact HP Technical Support.
The Level 2 Threshold setting is incorrect.552146805
WCorrect the setting, then retry. If the same
problem persists despite retrying, please
contact HP Technical Support.
The Level 1 SIM setting is incorrect.552156805
WCorrect the setting, then retry. If the same
problem persists despite retrying, please
contact HP Technical Support.
The Level 2 Suspend setting is incorrect.552166805
EPlease contact HP Technical Support.The maximum number of SLPRs that can
be set was exceeded.
552176805
WCorrect the setting, then retry. If the same
problem persists despite retrying, please
contact HP Technical Support.
The Level 1 Sleep setting is incorrect.552186805
WCorrect the setting, then retry. If the same
problem persists despite retrying, please
contact HP Technical Support.
The Sleep Time setting is incorrect.552196805
EPlease contact HP Technical Support.The SLPR number is duplicated.552206805
WCorrect the setting, then retry. If the same
problem persists despite retrying, please
contact HP Technical Support.
The CLPR number is duplicated.552216805
EPlease contact HP Technical Support.This function cannot be used by the
storage partition administrator.
565246805
Part code 6810
Table 61 Error codes (part code 6810)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WThe operation has been rejected because
there is no data to set. Click [OK], then
go on to the next operation.
No data has been changed.51226810
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
74406810
iTo cancel the operation, click [OK].Do you want to cancel?91016810
iTo execute the operation in Preview,
click [OK].
Do you want to apply?91026810
WTo change the mode, click [OK].The value that is under setup is not
reflected yet. Do you want to change the
mode?
91066810
Otherwise, click [Cancel].
WTo continue the processing, click [OK].
Otherwise, click [Cancel].
The value that is under setup is not
reflected yet. Do you want to continue
the operation?
91076810
WTo delete the specified line of settings
from the Preview list, click [OK].
Otherwise, click [Cancel].
Do you want to delete the specified line
of settings from the Preview list?
91116810
242 Message (part code group 6nnn)