HP P9000 Remote Web Console Messages (AV400-96401, October 2011)

Part code 6805
Table 60 Error codes (part code 6805)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
50996805
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
60126805
WPlease wait for a while, and then retry
the operation. If this problem persists,
please contact HP Technical Support.
The SVP is busy.60236805
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
70606805
EIf the same error occurs despite retrying,
please contact HP Technical Support.
An error occurred during SVP
processing.
71116805
EIf the same error occurs despite retrying,
please contact HP Technical Support.
This error code is not registered.73106805
WPlease wait for a while, and then retry
the operation. If this problem persists,
please contact HP Technical Support.
A communication time-out error occurred
in the subsystem.
80016805
WRetry later.Error happened after some change
occurred. Please refresh the array
configuration. Please retry later.
80026805
Communication is busy.
EPlease contact HP Technical Support.The configuration could not be changed.81106805
EIf this problem persists, please contact
HP Technical Support.
The storage system status is invalid.83106805
EInstall the necessary PCBs.No PCBs are installed.86596805
WCorrect the cache resource number (CLPR
No.), then retry the operation. If this
An invalid CLPR No. was detected.550096805
problem persists, please contact HP
Technical Support.
EPlease contact HP Technical Support.An invalid SLPR No. was detected.550106805
WSpecify the number of CLPRs within the
valid range.
The maximum number of CLPRs that can
be created was exceeded.
552096805
WCorrect the setting, then retry. If the same
problem persists despite retrying, please
contact HP Technical Support.
The Block Option setting is incorrect.552106805
WCorrect the setting, then retry. If the same
problem persists despite retrying, please
contact HP Technical Support.
The Do not Block (Volume Level) option
setting is incorrect.
552116805
WCorrect the setting, then retry. If the same
problem persists despite retrying, please
contact HP Technical Support.
The options "Block Option" and "Do not
Block (Volume Level)" cannot be
specified at the same time.
552126805
WCorrect the setting, then retry. If the same
problem persists despite retrying, please
contact HP Technical Support.
The Level 1 Threshold setting is incorrect.552136805
Part code 6805 241