HP P9000 Remote Web Console Messages (AV400-96401, October 2011)

Table 59 Error codes (part code 6610) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WConfirm whether the specified volume is
a multiplatform volume. Also, confirm the
A multiplatform volume is included in the
specified volumes.
593326610
version of the microcode of the storage
system.
The Add Pair operation cannot be
performed using multiplatform volumes.
WCheck the value of the path watch time.The value of the path watch time is not
entered or is outside the range. Check
the value of the path watch time.
593356610
WSpecify the correct LDKC number.The specified LDKC number is incorrect.
Specify the correct LDKC number.
656636610
WSpecify another volume.The specified volume is not valid for this
program product. Specify another
volume.
656646610
WCheck the monitoring setting.The specified volume is not the volume
to be monitored. Check the monitoring
setting.
656656610
WThe microcode versions between the
DKCMAIN and the SVP might not match.
The current microcode version of
DKCMAIN cannot assign remote
command devices to mirrors.
657776610
Confirm the microcode versions of the
DKCMAIN and the SVP.
WCheck if a remote command device was
assigned to the specified mirror.
No more remote command devices can
be assigned to the specified mirror.
657786610
WCheck if the specified journals include
mirrors available to assign a remote
command device.
There are no mirrors available to assign
a remote command device.
657796610
WSpecify different mirror IDs in the mirror
1 and the mirror 2 parameters.
The same mirror ID is specified in the
mirror 1 and the mirror 2 parameters.
657806610
iTo stop the operation, click [OK].Are you sure you want to cancel the
export?
690166610
To continue the operation, click [Cancel].
WCheck the number of registered journals.No more journals can be registered,
because the number of registered
journals has reached the maximum.
690176610
WCheck the LDKC number for the specified
data volume, and specify only one LDKC
number.
There are two or more LDKC numbers
for the specified data volume. In this
operation, please specify only one LDKC
number.
690186610
WReduce the number of data volumes and
retry the operation.
The number of data volumes exceeds the
maximum.
690196610
You cannot create additional volume
pairs once the maximum number has
been reached
WCheck the number of registered EXCTG.Journals cannot be added to the
extended consistency group (EXCTG),
690216610
because the number of EXCTG exceeds
the maximum.
WTo continue the operation, click [OK].Do you want to release the remote
command device from the mirror?
690846610
Otherwise, click [Cancel].
240 Message (part code group 6nnn)