HP P9000 Remote Web Console Messages (AV400-96401, October 2011)

Table 59 Error codes (part code 6610) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WCheck the range setting. If you specify
"Mirror," select only one data volume
pair in the mirror.
You are specifying "Mirror" for the range
and trying to manipulate the same
mirror. Select only one data volume pair
550396610
in the mirror when you specify "Mirror"
for the range.
WCheck the specified controller ID.The specified controller ID cannot be
used.
552026610
WThe value of "Threshold of start Async
JNL" must equal or be less than the
"Threshold of start Sync JNL" value.
Some of the specified values are
incorrect. Two times the value of "M-JNL
Cache" plus the value of "R-JNL Cache"
552076610
must be equal to or less than 100. Or,
the value of "Threshold of start Async
JNL" must be equal to or less than the
value of "Threshold of start Sync JNL."
WSpecify the correct journal number.The specified journal number is incorrect.552086610
Specify the correct journal number.
WSpecify normal deletion, or specify
"Mirror" as the range.
There are some pairs where "Mirror" is
not specified as the range in the pairs
specified to be deleted forcibly.
552296610
Specify "Mirror" as the range when you
want to delete pairs forcibly.
WTo delete pairs, click [Yes]. Otherwise,
click [No].
[Warning]
There are some pairs where "Group" is
not specified as the range in the pairs
specified to be deleted forcibly.
556446610
Other pairs in the same group may
suspend due to a failure by this
operation.
Are you sure you want to delete pairs?
WRegister a journal.There is no journal that can be used as
a master journal
565046610
WRegister secondary storage systems, then
retry the operation.
There are no secondary subsystems
available. Please register secondary
subsystems and then retry the operation.
565056610
WThere are no consistency groups
available. Create unused consistency
groups, then retry the operation.
There are no consistency groups
available. Please create unused
consistency groups and then retry the
operation.
565226610
WCheck the mirrors of the specified
volume.
No more mirrors can be created for the
specified volume.
565236610
WCheck the error information.An error occurred.590046610
WSpecify the valid value.There are some invalid input values.590056610
WCheck the number of journal volumes in
the specified journal group, or check the
number of the selected volumes.
No more journal volumes can be
registered, or too many volumes are
selected.
590066610
WTo delete the specified storage system,
click [OK]. Otherwise, click [Cancel].
Are you sure you want to delete the
specified subsystems?
590076610
WTo delete the specified path, click [OK].
Otherwise, click [Cancel].
Are you sure you want to delete the
paths of the specified subsystem?
590086610
236 Message (part code group 6nnn)