HP P9000 Remote Web Console Messages (AV400-96401, October 2011)

Table 58 Error codes (part code 6510) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WTo delete the specified path, click [OK].
Otherwise, click [Cancel].
Are you sure you want to delete the
paths of the specified subsystem?
590086510
WClick [OK]. Apply the preview data to
the storage system, then retry the
operation.
Since the number of preview data
exceeded the maximum, the excess data
were discarded. No more preview data
can be stored.
590096510
iCheck the contents of the primary and
secondary volumes. If the contents match,
click [Yes]. Otherwise, click [No].
WARNING:
Initial copy mode "None" is selected for
some volume pair. Are you sure that the
590106510
primary data volume and the secondary
data volume of the pair are already
synchronized?
iTo output the file, click [Yes]. Otherwise,
click [No].
Are you sure you want to output the %s
file?
590116510
WTo overwrite the file, click [Yes].
Otherwise, click [No].
The specified file already exists. Do you
want to overwrite this file?
590136510
WCheck the parameters of the DKC setting.The same DKC is specified more than
once.
590266510
WTo continue the operation, click [OK]. To
cancel the operation, click [Cancel].
The monitoring data saved at present
will be deleted.
590306510
The current monitoring data will be
deleted if you change the setting of the
monitoring switch. If necessary, use the
Performance Monitor Export Tool to
export the monitoring data file.
iTo continue processing, click [OK]. To
stop processing, click [Cancel].
The monitoring data being saved at
present is deleted when the monitoring
switch is set to Enable at the next time.
590316510
If the currently monitoring data is
needed, use the Export Tool to save the
data.
WPurchase a license for Continuous Access
Journal, then install it.
You cannot add journal volumes because
Continuous Access Journal is not
installed.
590396510
WAll journals are used by Continuous
Access Journal Z or Continuous Access
There are no valid journals.590426510
Journal. If possible, delete the journals
for Continuous Access Journal Z or
Continuous Access Journal, then start the
Continuous Access Journal Z window or
the Continuous Access Journal window.
WReduce the number of journal volumes
to be registered, or increase the number
of journal volumes to be deleted.
The number of journal volumes in some
journals exceeds the maximum.
Adjust the number of journal volumes.
590436510
WUse the sort function to identify volumes
with the same LDKC number, the same
CU number and the same LDEV number.
The same volume is stored more than
once in the Preview list.
Please use the sort function to identify
volumes with the same LDKC number,
591006510
the same CU number and the same LDEV
number.
230 Message (part code group 6nnn)