HP P9000 Remote Web Console Messages (AV400-96401, October 2011)

Table 56 Error codes (part code 6505) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
volume or Thin Provisioning Z volume
that was specified as the secondary data
volume was being initialized.
WSpecify “Mirror” for the [Range], then
retry the operation.
The operation failed, because the
consistency (CT) group of specified data
688506505
volume was being shared with multiple
primary and secondary storage systems,
and “LU” was specified for the [Range].
WSpecify another CT group, then retry the
operation.
The operation failed, because the
specified consistency (CT) group was
688516505
shared with multiple primary and
secondary storage systems.
WCheck whether the specified CT group
or the secondary data volume was
The operation failed, because the
specified consistency (CT) group or the
688526505
shared with multiple primary and
secondary storage systems or not.
secondary data volume was being
shared with multiple primary and
secondary storage systems. This CT
group or the secondary data volume
cannot be used for Delta resync.
WSpecify another journal, then retry the
operation.
The operation failed, because the
specified journal was shared with
688536505
multiple primary and secondary storage
systems.
WCheck if a remote command device is
assigned to the specified mirror.
The operation failed, because a remote
command device has already been
assigned to the specified mirror.
688576505
WCheck the status of the specified mirror.The operation failed, because the
specified mirror was invalid.
688586505
ECheck the status of the specified remote
command device.
The operation failed, because the
specified remote command device was
blocked.
688596505
WCheck if the serial number of the external
volume that is used as a remote
The operation failed, because the serial
numbers between the remote command
device and the mirror did not match.
688606505
command device matches the one of the
storage system connected to the mirror.
WCheck the status of the specified journal.The operation failed, because the
specified journal was not in the
688616505
configuration of 3DC cascade or 3DC
multi target.
WSpecify another remote command
device, then retry the operation.
The specified remote command device
cannot be assigned to a mirror any
further.
688626505
WCheck the number of remote command
devices which has been assigned to a
mirror.
The operation failed, because the
number of assignable remote command
device to a mirror exceeded the
maximum.
688636505
WCheck if a remote command device was
assigned to the specified mirror.
The operation failed, because a remote
command device was not assigned to
the specified mirror.
688706505
WRelease the quorum disk, or select
another volume.
The operation failed, because the
specified volume was a quorum disk.
688856505
224 Message (part code group 6nnn)