HP P9000 Remote Web Console Messages (AV400-96401, October 2011)

Table 56 Error codes (part code 6505) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WThe master journal group of the specified
primary data volume runs on the 2DC
The Pairresync operation failed because
the specified primary data volume was
one of the following.
687846505
configuration in which the Continuous
Access Synchronous or External Storage
Access Manager cooperates.
• The volume was not used by
Continuous Access Synchronous or
External Storage Access Manager.
Delete the Continuous Access
Synchronous or External Storage Access
Manager pair volume or suspend it.
• The volume was used by Continuous
Access Synchronous or External
Storage Access Manager, but the pair
status was not PSUS or PSUE.
WCheck the status of the specified M-VOL
from the host or the SVP.
The operation failed because the
specified M-VOL is used as FICON(R)
Data Migration.
688046505
WCheck the status of the specified R-VOL
from the host or the SVP.
The operation failed because the
specified M-VOL is used as FICON(R)
Data Migration.
688056505
WSpecify a volume that is not used by
FICON(R) Data Migration.
The specified volume cannot be used as
a journal volume because it is used by
FICON(R) Data Migration.
688116505
WCheck each capacity of the primary data
volume and the secondary data volume
A pair could not be created because the
specified secondary data volume was a
688126505
after the capacity change of secondaryThin Provisioning or Thin Provisioning Z
data volume ends. Plan a combination
of volumes for pair creating.
volume whose capacity was being
changed.
WCheck each capacity of the primary data
volume and the secondary data volume
A pair could not be created because the
specified primary data volume was a
688136505
after the capacity change of primaryThin Provisioning or Thin Provisioning Z
data volume ends. Plan a combination
of volumes for pair creating.
volume whose capacity was being
changed.
WThe specified volume runs on the 2DC
configuration in which the Continuous
The pair cannot be released because the
specified volume is used as the pair
688156505
Access Synchronous or External Storage
Access Manager cooperates.
volume of Continuous Access
Synchronous or External Storage Access
Manager.
Release the pair of Continuous Access
Synchronous or External Storage Access
Manager, then retry the operation.
WRetry the operation after the completion
of discarding zero data on the specified
volume.
The operation failed, because the
specified secondary data volume was a
volume of Thin Provisioning or Thin
688426505
Provisioning Z whose zero data was
being discarded.
WRetry the operation after the completion
of discarding zero data on the specified
volume.
The operation failed, because the
specified primary data volume was a
volume of Thin Provisioning or Thin
688436505
Provisioning Z whose zero data was
being discarded.
WWait until the initializing processing is
completed, and then retry the operation.
The operation failed because the pool
associated with the Thin Provisioning
688486505
volume or Thin Provisioning Z volume
that was specified as the primary data
volume was being initialized.
WWait until the initializing processing is
completed, and then retry the operation.
The operation failed because the pool
associated with the Thin Provisioning
688496505
Part code 6505 223