HP P9000 Remote Web Console Messages (AV400-96401, October 2011)

Table 56 Error codes (part code 6505) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WCheck if the specified journal is being
used by other program product you are
using.
Journals cannot be added to the
extended consistency group (EXCTG),
because the specified journals are being
used by another program product.
586256505
WCheck the status of the command device.The specified operation failed because
the command device was not registered
or has been blocked.
586276505
WCheck the attribute of the journals in the
specified extended consistency group
(EXCTG).
Journals cannot be added to the
specified extended consistency group
(EXCTG), because different journal
attributes coexist in the EXCTG.
586286505
WIf this problem persists please contact HP
Technical Support.
The specified operation failed because
of a temporary path failure. Retry the
586296505
operation. If this problem persists, please
contact HP Technical Support.
WConfirm whether the specified volume is
set by Cache Residency or Cache
Residency Z.
The specified volume cannot be used as
a journal volume because the volume is
set by Cache Residency or Cache
Residency Z.
586416505
WCheck the DKCMAIN microcode version
of the secondary storage system, and
The operation failed because the
Continuous Access Journal or the
586836505
contact HP Technical Support to confirmContinuous Access Journal Z function of
whether the Continuous Access Journalthe secondary storage system does not
support the Delta resync function. or the Continuous Access Journal Z
function supports the Delta resync
function.
WCheck the status of the primary data
volume in the Continuous Access
The operation to change the status to the
status ready for Delta resync failed.
586846505
Synchronous window or the Continuous
Access Synchronous Z window.
The specified primary data volume
should meet the following requirements.
• The specified volume is a secondary
data volume for Continuous Access
Synchronous, External Storage Access
Manager, or Continuous Access
Synchronous Z.
• The pair status of Continuous Access
Synchronous, External Storage Access
Manager, or Continuous Access
Synchronous Z is PAIR or Duplex.
WCheck the following of the specified
primary data volume.
Delta resync operation failed because
the specified primary data volume was
not a data volume of Continuous Access
586856505
• The volume is an M-VOL of a
synchronous pair or an External
Synchronous, External Storage Access
Manager, or Continuous Access
Storage Access Manager pair, and
Synchronous Z, or the pair status of the
primary data volume was invalid.
the pair status is in PAIR or Duplex
when it is referenced from the
Continuous Access Synchronous
window, the Continuous Access
Synchronous Z window, the RAID
Manager, or the Business Continuity
Manager.
• The volume is an R-VOL of a
synchronous pair or an External
Storage Access Manager pair, and
the pair status is in SSWS or
212 Message (part code group 6nnn)