HP P9000 Remote Web Console Messages (AV400-96401, October 2011)

Table 56 Error codes (part code 6505) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WBe sure that IO suppression mode of the
specified secondary data volume is
The Add Pair (Paircreate) operation
failed due to one of the following
reasons:
583456505
enabled on the Universal Volume Mgr
window. If the IO suppression mode is
• The IO suppression mode of the
specified secondary data volume is
enabled.
disabled, check the microcode version
of DKCMAIN of the secondary storage
system, and contact HP Technical
Support.
• The microcode version of the
secondary storage system does not
support external volumes.
WFrom the Data Retention window, check
the settings of the specified secondary
data volume.
The Paircreate operation failed because
a Data Retention VMA was set up on the
specified secondary data volume.
583466505
WCheck the setting of the specified
secondary data volume in the Volume
Security for Mainframe window.
The Add Pair (Paircreate) operation
failed because of a Volume Security for
Mainframe setting on the specified
secondary data volume.
583476505
WFrom the Data Retention window, check
the settings of the specified primary data
volume.
The Paircreate operation failed because
a Data Retention VMA was set up on the
specified primary data volume.
583486505
WFrom the Volume Retention window,
check the settings of the specified
primary data volume.
The Add Pair operation failed because
the specified primary data volume had
a Protect attribute set by Volume
Retention.
583496505
WCheck the status of the primary data
volume in the Business Copy window or
the Business Copy Z window.
The Add Pair (Paircreate) operation
failed because the specified primary
data volume was one of the following:
583526505
• a Business Copy S-VOL
• a Business Copy Z T-VOL
• a reserved volume
WExtract the possible combination of
program products from the combinations
The operation failed because the
specified secondary data volume was
one of the following:
583536505
of program products described in the
message. Check the status of the
• An S-VOL of Business Copy.
secondary data volume from the window
• A T-VOL of Business Copy Z or
Compatible FlashCopy.
of the program product. To use the Thin
Provisioning volume as a secondary data
volume, release the attribute of the
• A reserved volume of Business Copy
or Business Copy Z.
program product combined with the Thin
Provisioning volume, and then retry the
operation.
• A P-VOL of Business Copy in Swap
or Reverse Copy status.
• An S-VOL of Business Copy Z in
Swap or Reverse Copy status.
• A P-VOL of Business Copy used in
conjunction with Continuous Access
Synchronous.
• A P-VOL of Business Copy used in
conjunction with External Storage
Access Manager.
• An S-VOL of Business Copy Z or
Compatible FlashCopy used in
conjunction with Continuous Access
Synchronous Z.
• A volume used by XP Flex Copy.
Part code 6505 205