HP P9000 Remote Web Console Messages (AV400-96401, October 2011)

Table 56 Error codes (part code 6505) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
ECheck the SSB log, then contact HP
Technical Support.
An internal error occurred.87536505
ECheck the status of the cache and the
shared memory in the primary storage
system.
One side of the cache or the shared
memory is blocked in the primary
storage system.
87576505
Ensure that the cache and shared
memory is not blocked.
EPlease contact HP Technical Support.An unexpected error occurred in the
primary subsystem.
87586505
WCheck the SSB of the specified
secondary data volume. See the
The secondary data volume is unusable,
or the emulation type of the secondary
87646505
OPENPLATFORM SECTION in thedata volume is not supported by
maintenance manual to check whetherContinuous Access Journal or Continuous
Access Journal Z. the device emulation type of the
secondary data volume is supported.
WClick [OK] to finish processing. Then
wait a few minutes and retry the
operation.
The cache in the primary subsystem is
automatically recovering.
87706505
WSelect another volume.The primary data volume is already used
by Compatible XRC.
87766505
ECheck the status of the cache and the
shared memory in the secondary storage
system.
One side of the cache or the shared
memory is blocked in the secondary
storage system.
87786505
Ensure that the cache and shared
memory is not blocked.
WCheck the port, GID, and LUN settings
in the secondary storage system.
The specified volume is not defined in
the secondary storage system.
87886505
WVary the path offline from the other host,
then retry the operation.
The specified primary data volume is
online from hosts.
87916505
WCheck the status of the primary data
volume from the host or the SVP.
The operation failed because the
specified primary data volume was used
87956505
by Business Copy or Business Copy Z
and satisfied one of the following
conditions:
• The volume was a Business Copy
S-VOL in non-PSUS status.
• The volume was a Business Copy Z
T-VOL in non-Split status.
• The volume was a reserved volume.
• The volume was in the Reverse Copy
status.
WCheck the status of the secondary data
volume from the host or the SVP.
The operation failed because the
specified secondary data volume was
one of the following:
87966505
• An S-VOL or reserved volume of
Business Copy
• A T-VOL or reserved volume of
Business Copy Z.
• A T-VOL of Compatible FlashCopy.
192 Message (part code group 6nnn)