HP P9000 Remote Web Console Messages (AV400-96401, October 2011)

Table 55 Error codes (part code 6010) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WSelect a RCU and a quorum disk ID that
have the same serial number and the
controller ID, then retry the operation.
The serial number and the controller ID
of the RCU registered in a quorum disk
do not correspond with the specified
RCU.
657736010
WSelect the quorum disk ID corresponding
with the serial number and the controller
The serial number and the controller ID
of the RCU registered in a quorum disk
657746010
ID of the RCU that which is used by the
specified pair, then retry the operation.
do not correspond with the information
of RCU used by the specified pair.
WSpecify the quorum disk ID, then retry
the operation.
The quorum disk ID was not specified.
When the [Change attribute to ESAM]
658046010
parameter has been changed from [No]
to [Yes], specify the quorum disk ID.
WCheck the LDKC number for the specified
data volume, and specify only one LDKC
number.
There are two or more LDKC numbers
for the specified data volume. In this
operation, please specify only one LDKC
number.
690186010
WRegister RCUs in the CU or RCUs of CU
Free, then retry the operation.
There are no RCUs available. Register
RCUs in the CU or RCUs of CU Free,
then retry the operation.
690226010
WTo create pairs where different CU
numbers exist, register RCU of CU Free
and retry the operation.
There are no RUCs available.690236010
To crate pairs with RCU in the CU, select
the M-VOLs again so that different CU
numbers do not coexist in the M-VOLs,
and then retry the operation.
WClick [OK]. Apply the Preview data to
the disk storage system, then retry the
operation.
Since the number of preview data
exceeded the maximum, the excess data
were discarded. No more preview data
can be stored.
690336010
WClick [OK]. Apply the Preview data to
the disk storage system, then retry the
operation.
The number of preview data exceeds the
maximum.
No more preview data can be stored.
690346010
WSelect M-VOLs so that different CU
numbers do not coexist in the M-VOLs,
and retry the operation.
Different CU numbers coexist in the
selected M-VOLs. Select M-VOLs so that
different CU numbers do not coexist in
the M-VOLs, and retry the operation.
690356010
WChange the number of characters used
for the file name to less than 32, then
retry operation.
The file name should be from 1 to 32
characters.
690366010
WDelete the unnecessary script files, then
retry the operation.
More than 256 script files cannot be
transferred to the SVP.
690376010
WSelect the file name, then retry the
operation.
File name is not selected.690386010
WTo delete the file, click [OK], To cancel
the deletion, click [Cancel].
Are you sure you want to delete the
selected file?
690396010
WPlease contact HP Technical Support after
checking the version of the DKAMAIN
microcode.
The current DKCMAIN microcode cannot
use External Storage Access Manager.
690716010
186 Message (part code group 6nnn)