HP P9000 Remote Web Console Messages (AV400-96401, October 2011)

Table 55 Error codes (part code 6010) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WSince all the added SSIDs are
overlapped, the operation of adding
All SSIDs which you set have already
been registered. This operation will
93116010
SSIDs cannot be executed. Click [OK],
and continue.
terminate because there is no SSID which
can be added.
WFollow the instructions in the message.Through this operation, M-VOL status will
be changed to Simplex mode even if the
M-VOL is online to the host.
93166010
iFollow the instructions in the message.The destination volume of the specified
volume pair may contain some
93176010
inconsistency because volume copy is
not completed yet. Full volume
initialization is required before re-using
it.
iTo delete the pair, even though you
cannot re-execute the R-VOL deletion,
click [OK]. If not, click [Cancel].
As a result of this operation, you will not
be able to re-start ERASE R-VOL
operation.
93186010
WTry again after the script ends.The specified operation is prohibited
while the script is running.
93246010
iClick [OK].The script is terminated forcibly.93256010
iClick [Refresh] to update the history file.
If this problem persists, please contact
HP Technical Support.
The monitoring time is over, but the
history file is not fully updated yet.
93276010
iClick [OK], then continue the operation.This operation is not applied yet.93326010
iThe requested operation has started.
Click [OK] to close the dialog.
The requested operation has started.93376010
WCheck the specified values and retry the
operation.
The specified value exceeds the range.
Alternatively, the relationship between
the specified values is not appropriate.
93606010
WSelect "Add RCU" command, then
register a DKC path.
If you plan to create a pair with the
specified LUSE volumes, a DKC path is
required.
550356010
WFind the CUs that can be used by the
storage system specified by the
Controller ID.
The subsystem specified by Controller ID
is not available for the particular CU
selected from the tree.
552026010
WFind the ports that can be used by the
storage system specified by the
There are no initiator ports that can be
used by the subsystem specified by
Controller ID.
552036010
Controller ID, and set them as initiator
ports.
WCheck the settings of the specified RCU,
M-VOL and R-VOL.
The M-VOL or R-VOL is not supported by
the specified RCU.
552046010
WRegister the consistency groups, then
retry the operation.
There are no consistency groups
available for the CLPR of the specified
565376010
volumes. Please register the consistency
groups and then retry the operation.
WCheck the size of the file, decrease the
size and retry the operation.
The size of the specified file exceeds 8
megabytes, so the file cannot be
uploaded.
565406010
WTo cancel the change operation of the
option parameter, click [OK]. Otherwise,
click [Cancel].
Are you sure you want to cancel the
change operation of the option
parameter that you specified?
590016010
184 Message (part code group 6nnn)