HP P9000 Remote Web Console Messages (AV400-96401, October 2011)

Table 55 Error codes (part code 6010) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WTo terminate the script, click [OK].
Otherwise, click [Cancel].
The script is running now. Are you sure
you want to terminate the script?
91266010
WTo close the graphs, click [OK].
Otherwise, click [Cancel].
Are you sure you want to close all active
graphs?
91276010
WClick [OK], then specify the correct
volume.
The specified volume was not found.91286010
iClick [OK] to continue processing.Recovered from the error that occurred
when copying started.
91296010
iFollow the instructions in the message.As a result of this operation, you will not
be able to re-start ERASE R-VOL
91546010
operation. To delete the pair forcibly,
please try again with 'Force' option.
iClick [OK].The history file has been updated. Select
the OK button to display the history logs
from the beginning.
91556010
iFollow the instructions in the message.WARNING: Destination volume of
specified volume pair may contain some
93006010
inconsistency, because volume copy is
not completed yet. Full volume
initialization is required before re-using
it.
iFollow the instructions in the message.WARNING: Through this operation,
M-VOL status will be changed to SMPL
93016010
status forcibly, but R-VOL status will not
be changed. If you do this operation,
please change the R-VOL status to SMPL
later.
WConfirm whether the command device
for Business Continuity Manager is
defined.
There are no valid volumes.93036010
WSet the port to Initiator before registering
RCU.
There are no initiator ports.93056010
WThere is no Remote Copy license. Set the
license.
The Remote Copy function is not installed
in this controller. You cannot create
pairs.
93066010
WSince the same volume where multiple
paths are defined was selected, the
You specified the same volumes more
than once. The duplicate occurrences
were excluded.
93076010
overlapped one was eliminated. Click
[OK] and continue.
WSince there were overlapped paths in
the added paths, the overlapped paths
You set the same path more than once.
The duplicate paths are excluded.
93086010
were eliminated. Click [OK] and
continue.
WSince all the added paths overlapped,
the operation of adding paths cannot be
executed. Click [OK] and continue.
All paths which you set have already
been registered. This operation will
terminate because there is no path which
can be added.
93096010
WSince there were overlapped SSIDs in
the added SSIDs, the overlapped SSIDs
You set the same SSID more than once.
Duplicate SSIDs are excluded.
93106010
were eliminated. Click [OK], and
continue.
Part code 6010 183