HP P9000 Remote Web Console Messages (AV400-96401, October 2011)

Table 3 Error codes (part code 0003) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
20040003
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
20050003
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
20060003
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
20090003
EPlease contact HP Technical Support.The status of the storage system requires
maintenance (for example, the storage
20110003
system is blocked, the shared memory is
inconsistent, or some other factor).
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
20120003
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
20130003
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
20140003
EWait, then retry the operation.An error occurred while connecting to
the storage system.
20150003
If the same problem persists despite
retrying, please contact HP Technical
Support.
WWait, then retry the operation.A service engineer is accessing the
system in Modify mode.
20160003
WRe-execute the request for starting
exclusive lock.
Network error detected; exclusive lock
is released forcibly.
20170003
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
20220003
WWait, then retry the operation.Communication busy.20320003
WWait, then click [Refresh] on the [File]
menu. When an error occurs during a
login, wait, then log in again.
The SVP is not ready yet, or an internal
processing is being executed.
20330003
ECheck the DKC status and the current
status of the configuration setting. If
The subsystem status is invalid.20830003
necessary, re-execute the setting
operation.
ECheck the DKC status and the current
status of the configuration setting. If
The subsystem status is invalid.20840003
necessary, re-execute the setting
operation.
EPlease contact HP Technical Support
when the same problem persists.
The operation cannot be performed,
because the SVP microcode version does
20980003
not match the DKCMAIN (subsystem)
microcode version.
EWait a while, then retry the operation.
If the same problem persists, please
contact HP Technical Support.
The operation cannot be performed,
because an inoperative MP exists.
20990003
18 Message (part code group 0nnn)