HP P9000 Remote Web Console Messages (AV400-96401, October 2011)

Table 53 Error codes (part code 6005) (continued)
Severity LevelRecommended ActionError MessageError
Number
Part
Code
WThe operation failed, because there was
an error in the specified parameter.
688276005
• The serial number of the
local DKC cannot be set
as the serial number of
the other DKC. Check the
input serial number of the
other DKC.
• A quorum disk cannot be
registered in a same
external storage device
with a different quorum
disk ID. Check whether a
quorum disk is registered
in the selected external
storage device with a
different quorum disk ID.
• The serial number of the
other DKC, which is set
from MCU (or RCU)
when registering a
quorum disk, might be
different from the serial
number of the RCU (or
MCU). Check the input
serial number of the other
DKC, which is set from
MCU (or RCU) when
registering a quorum
disk.
WCheck the volume setting.The specified volume has already been
set to the quorum disk.
688296005
WCheck the volume setting.The specified volume is not a quorum
disk.
688306005
WRelease all the pairs of
External Storage Access
The operation failed, because the
specified quorum disk was used for
External Storage Access Manager.
688316005
Manager of the specified
quorum disk ID, then retry
the operation.
WRetry the operation after the
completion of discarding
The operation failed, because the
specified M-VOL was a volume of Thin
688446005
zero data on the specified
volume.
Provisioning or Thin Provisioning Z
volume whose zero data was being
discarded.
WRetry the operation after the
completion of discarding
The operation failed, because the
specified R-VOL was a volume of Thin
688456005
zero data on the specified
volume.
Provisioning or Thin Provisioning Z
volume whose zero data was being
discarded.
WWait until the initialization
of the pool is completed,
and then retry the operation.
The operation failed, because the pool
associated with the Thin Provisioning
volume or Thin Provisioning Z volume
688466005
that is specified as the M-VOL was
being initialized.
WWait until the initialization
of the pool is completed,
and then retry the operation.
The operation failed, because the pool
associated with the Thin Provisioning
volume or Thin Provisioning Z volume
688476005
176 Message (part code group 6nnn)