HP P9000 Remote Web Console Messages (AV400-96401, October 2011)

Table 53 Error codes (part code 6005) (continued)
Severity LevelRecommended ActionError MessageError
Number
Part
Code
External Storage Access
Manager pair volume.
WRefresh the window, and
confirm whether the status of
The Reverse Resync operation failed
because the status of the specified
volume was not SSWS.
687936005
the specified volume is
SSWS.
WCreate a path from the RCU
to the MCU.
The operation failed because the path
from the RCU to the MCU did not exist.
687946005
EContact HP Technical
Support and check the
shared memory.
The operation failed. The shared
memory might be insufficient.
Please contact HP Technical Support.
687956005
WRefresh the window, and
confirm the pair status of the
specified volume.
The operation failed. The operation
cannot be accepted in the pair status
of the specified volume.
687966005
WCheck each capacity of the
M-VOL and the R-VOL after
A pair could not be created because
the specified R-VOL was a Thin
688126005
the capacity change ofProvisioning volume or Thin
R-VOL ends, and plan aProvisioning Z volume whose capacity
was being changed. combination of volumes for
pair creating.
WCheck each capacity of the
M-VOL and the R-VOL after
A pair could not be created because
the specified M-VOL was a Thin
688136005
the capacity change ofProvisioning volume or Thin
M-VOL ends, and plan aProvisioning Z volume whose capacity
was being changed. combination of volumes for
pair creating.
WThe specified volume is a
primary data volume of the
A pair cannot be created because the
specified volume is used as a primary
688166005
Continuous Access Journal,data volume of the Continuous Access
Journal. which runs on the 2DC
configuration in which the
Continuous Access
Synchronous or External
Storage Access Manager
cooperates. Specify another
volume.
WThe RCU runs on the 2DC
configuration in which the
The specified R-VOL was a pair volume
of the Continuous Access Journal.
688176005
Continuous Access Journal
cooperates.
A pair could not be created because
"Cylinder" was set to the "Difference
Management." Set "Track" to the
"Difference Management,"
then retry the operation.
WInstall the External Storage,
then retry the operation.
The operation failed, because the
External Storage function was not
installed.
688266005
Part code 6005 175