HP P9000 Remote Web Console Messages (AV400-96401, October 2011)

Table 53 Error codes (part code 6005) (continued)
Severity LevelRecommended ActionError MessageError
Number
Part
Code
WConfirm that the shredding
has completed in the Data
A pair cannot be created because the
specified M-VOL is being shredded by
585686005
Retention window, then retry
the operation.
Data Retention. Retry the operation after
the shredding is completed.
WConfirm that the shredding
has completed in the Data
A pair cannot be created because the
specified R-VOL is being shredded by
585696005
Retention window, then retry
the operation.
Data Retention. Retry the operation after
the shredding is completed.
WCheck whether the number
of the specified R-VOL is
The operation failed because the host
did not allow the specified R-VOL to be
used as an R-VOL.
585866005
correct or the status of the
usage of the host to the
specified R-VOL.
WCheck whether the version
of DKC microcode of RCU
The Add Pair operation failed.
The volume pair cannot be created with
Time Stamp set, because RCU does not
support 4x4x4 cascade function.
586406005
supports the 4x4x4 cascade
function. If the version does
not support the 4x4x4
cascade function, update the
microcode of RCU to the
version that supports the
function, or retry the Add
Pair operation with the
setting that does not transfer
Time Stamp.
WCheck the licensed capacity
of these program products.
The licensed capacity of Continuous
Access Synchronous or Continuous
587126005
See the user's guides of
Continuous Access
Access Synchronous Z on the RCU is
insufficient.
Synchronous or Continuous
Access Synchronous Z for
details of the licensed
capacities.
WCheck the licensed capacity
of these program products.
The licensed capacity of Continuous
Access Synchronous or Continuous
587146005
See the user's guides of
Continuous Access
Access Synchronous Z on the MCU is
insufficient.
Synchronous or Continuous
Access Synchronous Z for
details of the licensed
capacities.
WCheck if the configuration
changing process by RAID
The configuration changing processes
are conflicting at DKC.
657406005
Manager, Auto LUN, or
Quick Restore is not in the
operation, then retry the
operation.
WCheck whether the specified
R-VOL is a Thin Provisioning
volume.
The operation failed because the
specified M-VOL was used as a Thin
Provisioning volume.
680116005
WCheck whether the specified
R-VOL is a Thin Provisioning
volume.
The operation failed because the
specified R-VOL was used as a Thin
Provisioning volume.
680126005
Part code 6005 173