HP P9000 Remote Web Console Messages (AV400-96401, October 2011)
Table 53 Error codes (part code 6005) (continued)
Severity LevelRecommended ActionError MessageError
Number
Part
Code
Copy Z T-VOL/reserved volume or a
reserved volume of Auto LUN.
WDelete the LUs defined on
the specified port, then retry
the operation.
Logical paths exist on the RCU port.89246005
WConfirm the status of Volume
Security for Mainframe of
the specified R-VOL.
The specified R-VOL is prohibited to use
by Volume Security for Mainframe.
89266005
WConfirm the status of Volume
Security for Mainframe of
the specified M-VOL.
The specified M-VOL is prohibited to
use by Volume Security for Mainframe.
89276005
WRefresh the window, then
retry the operation.
Invalid port type.89296005
If the same problem persists
despite retrying, please
contact HP Technical
Support.
WDelete the LUs defined on
the specified port, then retry
the operation.
Logical paths exist on the RCU port.89306005
WDelete the LUs defined on
the specified port, then retry
the operation.
Logical paths exist on the RCU port.89316005
WCheck whether the specified
LDKC number or CU number
Since the configuration definition of the
specified LDKC number or CU number
89326005
is defined as configuration
information of the MCU.
does not exist, the logical paths
between MCU and RCU cannot be
established.
WCheck the configuration of
the specified R-VOL.
The Paircreate operation failed because
specified R-VOL is the NAS system
volume.
89346005
WCheck the microcode version
of the RCU.
The Paircreate operation failed. The
version of the specified RCU does not
89366005
support Remote Copy with the NAS
volume.
WCheck the LUN of the
specified M-VOL by using
The specified M-VOL cannot be used.89396005
RAID Manager, and specify
the LUN with the value less
than 1,024 for the M-VOL.
WConfirm the status of the
specified R-VOL.
The operation failed because the
specified R-VOL was in a Read Only
status by Volume Retention.
89406005
WRefresh the window a few
minutes later, and check the
The specified volume or other volume(s)
of the same group in the RCU is being
89436005
status of the specifiedchanged to Simplex/Suspend status.
Retry the operation a few minutes later. volume and other volume(s)
of the same group in the
RCU. If it is possible to
perform operations on the
volume(s), retry the
operation.
168 Message (part code group 6nnn)