HP P9000 Remote Web Console Messages (AV400-96401, October 2011)

Table 53 Error codes (part code 6005) (continued)
Severity LevelRecommended ActionError MessageError
Number
Part
Code
copying data, retry the
operation after the process
is completed.
WSelect another volume.A volume cannot be used as an R-VOL
when:
87456005
• it is used by Compatible XRC.
• it is used by PPRC or Remote Copy.
• it is used by Concurrent Copy.
• it is in a reserved condition.
• it is used by Continuous Access
Journal or Continuous Access Journal
Z.
• it is used by Business Copy Z or
Compatible FlashCopy.
WSee the INSTALLATION
SECTION and
The device emulation type of the M-VOL
is not supported.
87466005
OPENPLATFORM SECTION
in the maintenance manual
to confirm whether the
device emulation type of the
M-VOL is supported by
Remote Copy.
WThe version of the microcode
on the 9900 storage system
Current microcode version does not
support the specified operation.
87476005
does not support the
specified function or
operation. Please contact HP
Technical Support.
WData migration cannot start
because the volume is
Specified M-VOL may be in use by
HOST.
87486005
online. Vary the path offline,
and retry.
WCheck if the input number of
R-VOL is correct. If not, enter
Specified R-VOL is still online from
HOST.
87496005
the correct R-VOL number. If
the number is correct, vary
the specified path offline.
WConfirm the RCU controller
emulation type.
Remote Copy is not supported under
the RCU controller emulation type.
87516005
EPlease contact HP Technical
Support.
An internal error occurred.87536005
WCheck the serial number or
SSID of MCU, then retry with
correct parameter.
Invalid MCU serial number or MCU
SSID.
87546005
WCheck the serial number,
SSID or CU number of the
The serial number, SSID or CU number
of the RCU is invalid.
87556005
RCU, and retry the operation
with correct parameters.
Check the connection LCP
ports of the RCU. Connect
the path correctly, and retry
the operation
156 Message (part code group 6nnn)