HP P9000 Remote Web Console Messages (AV400-96401, October 2011)

Table 52 Error codes (part code 5310) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
iTo continue processing, click [OK]. To
stop processing, click [Cancel].
The Performance Control group is
deleted because no WWN is registered
in the Performance Control group.
90795310
WClick [OK].The control status will change to "Port
Control."
93125310
WClick [OK].The control status will change to
"WWN Control."
93135310
WSet up a maximum value to enable the
control.
The control status will change to "No
Control" because the upper value is 0
for all ports.
93145310
iIf you use the real time option for the
first time, turn the monitoring switch
ON.
The monitoring switch is turned OFF.93155310
WIf you accept the change in the control
status to "No Control", continue the
operation.
The control status will change to "No
Control."
93265310
NTo clear the settings, check the check
box of "Delete ports if CHA is
removed," and then click [Apply].
The settings for the removed ports
remain.
93285310
WIf you click [OK] on the next window,
the settings on port control will be
Next, the initialization for the settings
on port control will be executed.
93295310
initialized. To quit the operation, click
[Cancel] on the next window.
WIf you click [OK] on the next window,
the settings on WWN control will be
Next, the initialization for the settings
on WWN control will be executed.
93305310
initialized. To quit the operation, click
[Cancel] on the next window.
WCorrect the specified contents, and
request the setting of the configuration
information again.
The specified WWN is already in use.93315310
iClick [Yes] to change the control status.Do you want to change the control
status to Port Control?
93335310
iClick [Yes] to change the control status.Do you want to change the control
status to WWN Control?
93345310
iClick [Yes] to change the control status.Do you want to change the control
status to No Control?
93355310
iTo continue processing, click [OK]. To
stop processing, click [Cancel].
The Performance Control group extends
across multiple SLPRs. Do you want to
continue?
590005310
iReduce the number of WWNs to be
monitored, which exceeds the
maximum, and then retry the operation.
WWN cannot be registered because
the number of WWNs of one of the
ports to be monitored at the same time
exceeds the maximum.
657335310
150 Message (part code group 5nnn)