HP P9000 Remote Web Console Messages (AV400-96401, October 2011)

Table 48 Error codes (part code 5205) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WCheck the setting of the specified volume.Migration cannot be executed because
it is a migration between a Thin
657155205
Provisioning volume and a normal
volume that contains a component of a
LUSE volume
WCheck the setting of the specified volume.The specified volume cannot be set as a
reserved volume.
657165205
WCheck the specified volume capacity
after the completion of the capacity
expanding operation.
The specified volume cannot be used,
because it is a volume of Thin
Provisioning whose capacity is being
added.
657375205
WConfirm the capacity of the volume
specified as a migration target after the
The volume specified as a migration
target cannot be used, because it is a
657385205
capacity expanding operation is
completed.
volume of Thin Provisioning in capacity
expanding.
WCheck the specified volume capacity
after the completion of the capacity
expanding operation.
The specified volume cannot be used,
because it is a volume of Thin
Provisioning whose capacity is being
added.
657395205
WCheck if the configuration changing
process by RAID Manager, Auto LUN,
The configuration changing processes
are conflicting at DKC.
657405205
or Quick Restore is not in the operation,
then retry the operation.
WRetry the operation after the zero data
discarding operation is completed.
The volume specified as a migration
source cannot be used, because it is a
657485205
volume of Thin Provisioning in zero data
discarding.
WRetry the operation after the zero data
discarding operation is completed.
The volume specified as a migration
target cannot be used, because it is a
657495205
volume of Thin Provisioning in zero data
discarding.
WRetry the operation after the zero data
discarding operation is completed.
The specified volume cannot be used,
because it is a volume of Thin
657505205
Provisioning whose zero data is being
discarded.
WCheck the content of the operation.The volume specified as a migration
source cannot be used, because it is a
quorum disk.
657845205
WCheck the content of the operation.The volume specified as a migration
target cannot be used, because it is a
quorum disk.
657855205
WCheck the content of the operation.The volume specified as the reserved
volume cannot be used, because it is a
quorum disk.
657865205
WSpecify another volume, then retry the
operation.
The volume specified as a reserved
volume has an LU path setting.
750085205
WCorrect the number of reserved volumes
to set or release to 64 or less, and the
The number of target volumes that can
be executed at once exceeds the
maximum.
750105205
number of manual migration instructions
to 8 or less, then retry the operation.
Part code 5205 141