HP P9000 Remote Web Console Messages (AV400-96401, October 2011)

Table 48 Error codes (part code 5205) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WCheck the setting of the specified volume.The specified volume(s) are already
being used as of Thin Provisioning
volume (THP V-VOL) (s).
656745205
WRetry the operation after the quick format
is completed.
The volume specified as a migration
source cannot be used, because it is in
quick formatting.
656975205
WRetry the operation after the quick format
is completed.
The volume specified as a migration
target cannot be used, because it is in
quick formatting.
656985205
WRetry the operation after the quick format
is completed.
The specified volume cannot be used
because Quick Format is performed on
the specified volume.
656995205
WSpecify another volume.The volume specified as a migration
source cannot be used, because it is
being used by FICON(R) Data Migration.
657005205
WSpecify another volume.The volume specified as a migration
target cannot be used, because it is
being used by FICON(R) Data Migration.
657015205
WSpecify another volume.The volume specified as a reserved
volume cannot be used, because it is
being used by FICON(R) Data Migration.
657025205
WCheck the setting of the specified volume.The specified volume cannot be moved
because it is a Thin Provisioning volume
that is not associated with a pool.
657055205
WCheck the setting of the specified volume.The specified volume cannot be moved
because it is a Thin Provisioning volume
that is not associated with a pool.
657065205
WCheck the setting of the specified volume.The specified volume cannot be moved
because it is a Thin Provisioning volume
that is not associated with a pool.
657075205
WCheck the setting of the specified volume.Migration cannot be executed because
the Thin Provisioning volume that is the
657085205
migration source, and the Thin
Provisioning volume that is the migration
target are contained in the same pool.
WSpecify another volume.The specified following volumes cannot
be migrated. The migration source
657095205
volume is shared as a P-VOL or an S-VOL
of Continuous Access Journal and
Continuous Access Synchronous or
External Storage Access Manager, and
the migration target volume is a Thin
Provisioning volume.
WFor the combination of volumes that
cannot be migrated, see "Auto LUN with
The specified plan cannot be migrated,
because the plan is a combination of an
657125205
Thin Provisioning virtual volumes" in theinternal volume of OPEN-V and a Thin
Provisioning volume of OPEN-0V. HP P9000 Performance for Open and
Mainframe Systems User Guide.
WWait for a while, then retry the
operation.
Because the composition is being backed
up, a volume concerned cannot be
moved.
657145205
140 Message (part code group 5nnn)