HP P9000 Remote Web Console Messages (AV400-96401, October 2011)

Table 41 Error codes (part code 4005) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WCheck the setting.An LDEV number that does not apply to
the selected CU group has been
specified.
555764005
WTo use the prestaging function, set the
prestaging area by using Cache
Residency.
The prestaging is not executed because
the prestaging area does not exist.
Check the Cache Residency setting.
565424005
WWait, then retry the operation.The current Cache Residency setting
cannot be changed because the sidefile
size exceeds the threshold.
585114005
EWait, then retry the operation.The current Cache Residency setting
cannot be changed because the
prestaging operation is in progress.
585124005
WWait for a while, refresh the window,
then retry the configuration operation.
Prestaging not completed.585134005
Or check if storage system is blocked. If
the problem persists, please contact HP
Technical Support.
EPlease contact HP Technical Support.Currently running microcode version
does not support the specified operation.
585144005
WWait, then retry the operation.The specified operation cannot be
executed because one of the following
maintenance operations is in progress:
587094005
• LDEV formatting
• Correction Copy
• Drive Copy
• Changing the CHA/DKA status
• Changing the cache status
• Replacing an OEM drive microcode
• LDEV Shredding or Extent Shredding
• Extent Shredding is in progress
Therefore the specified operation cannot
be executed.
WVerify the resources allocation for the
user with security administrator role.
The specified LDEV cannot be used
because the user has no access right to
750154005
a resource group to which the LDEV
belongs.
WVerify the device emulation type of the
specified LDEVs.
The device emulation type of the
specified LDEVs is not supported.
750314005
Part code 4010
Table 42 Error codes (part code 4010)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
iCorrect the specified content, and issue
the request again.
Part of the range is already in use.10304010
iCorrect the specified content, and issue
the request again.
The specified value is outside the valid
range.
10324010
Part code 4010 121