HP P9000 Remote Web Console Messages (AV400-96401, October 2011)

Table 41 Error codes (part code 4005) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WCheck the settings, then retry the
operation.
The number of cache residency areas set
for the CLPR exceeds the maximum
552454005
available number of cache residency
areas.
CLPR No:%s
WCheck the settings, then retry the
operation.
The total number of Cache Residency
areas set for the CLPRs and the maximum
552464005
number of the Cache Residency areas
in the subsystem are not equal.
WCheck the settings, then retry the
operation.
The cache residency size set for the CLPR
is not a multiple of 512 MB.
552474005
CLPR No:%s
WRemove the Cache Residency settings
from the volumes, and then migrate the
parity group.
The parity group that contains the
volume(s) to which Cache Residency is
set cannot be migrated to another CLPR.
552654005
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
555304005
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
555314005
WSet the extent area within the size which
can be specified, then retry the
operation.
The specified extent is over the size
which can be specified.
555324005
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
555334005
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
555344005
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
555354005
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
555364005
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
555374005
WDisable the IO Suppression mode of this
volume, then retry the operation, or
Cache Residency cannot be set to the
specified volume because the IO
Suppression mode is set to Enable.
555384005
remove the volume from the volumes to
be set.
WEnable the cache mode of this volume,
and then retry the operation, or remove
the volume from the volumes to be set.
Cache Residency cannot be set to this
volume because its cache mode is set to
Disable.
555394005
EInstall the necessary program product.The specified function is not available
because it requires Open System Array
Management.
555404005
WInstall the required program product.The specified function is not available
because it requires Mainframe Array
Management.
555414005
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
555424005
120 Message (part code group 4nnn)