HP P9000 Remote Web Console Messages (AV400-96401, October 2011)

Table 39 Error codes (part code 03222) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
environment. Verify if the system is
affected or not.
WCheck the setting(s).Reclaim Zero Pages cannot be done to
the TSE volume.
10543303222
WSelect volumes of the same attribute
when expanding.
The TSE volume and the Thin
Provisioning Z volume cannot be
expanded at the same time.
10543403222
Part code 3305
Table 40 Error codes (part code 3305)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
EIf this problem persists, please contact
HP Technical Support.
The SSIDs are not defined.10353305
WThe size of volume that can be set differs
by the type of emulation.
The size of the specified volume is
outside the setting range.
10363305
Check the setting range of each
emulation type, then change the size of
volume.
EThe error does not occur normally
because it cannot be modified in the
The free space remaining in the parity
group is not enough to install a
customized volume (CV).
10373305
window. In the unlikely event that this
error occurs, please contact HP Technical
Support.
EThe error does not occur normally
because it cannot be modified in the
The specified emulation type of the
customized volume (CV) is a type that
cannot be combined.
10383305
window. In the unlikely event that this
error occurs, please contact HP Technical
Support.
WCheck the setting.A path is defined to the specified
volume.
10393305
WCheck and correct the settings.The CU number and the LDEV number
set in the VLL operation are the same as
those of other volumes.
10413305
WCorrect the settings, then retry the
operation.
An operation is specified for the
uninstalled VDEV.
10433305
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
10443305
WCorrect the specified content, and issue
the request again.
The specified Subsystem ID already
exists. Specify another SSID.
10453305
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
10493305
WCorrect the settings.The specified CU number cannot be set.10743305
ESpecify one or more than one operations
of Create LDEVs, Delete LDEVs in the VLL
operation.
In the VLL operation (Create LDEVs,
Delete LDEVs), there are some operations
which cannot be set together are
specified.
10753305
Part code 3305 113