HP P9000 Remote Web Console Messages (AV400-96401, October 2011)

Table 37 Error codes (part code 03122) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WCheck the state of the specified pool
volumes, then retry the operation.
The operation cannot be executed,
because the specified pool volumes
contain an abnormal pool volume.
10603603122
WExecute any of the following actions,
then retry the operation.
The setting cannot be executed, because
the specified pool has no free space.
10603703122
• Increase the pool capacity by adding
pool volume(s).
• Reduce the pool usage.
WSelect one table row.No table row, or two or more table rows
are selected.
10603803122
WRestore the blocked status of the pools.There are no valid volumes, because the
pools are blocked.
10604103122
WCheck the pool capacity, the maximum
reserved capacity, and the current
The shrinking operation cannot be
performed on the specified pool.
10604203122
reserved capacity, then retry the
operation.
WDelete the pool.The pool cannot be restored.10606203122
WExecute any of the following actions,
then retry the operation.
The pool cannot be restored.10606303122
• Increase the pool capacity by adding
pool volume(s).
• Reduce the pool usage.
WBlock the pool.The pool cannot be restored.10606403122
WCheck the support configuration of pools,
then retry the operation.
Four or more drive types cannot be
added to the specified pool.
10607703122
WInstall the necessary program product.The specified function is not available
because the necessary program product
is not installed.
10607803122
WCheck the support configuration of pools,
then retry the operation.
A volume of different RAID level cannot
be specified in the same drive type.
10608003122
WCheck the specified value of the
subscription limit, then retry the
operation.
The operation cannot be done because
there is no pool that can be associated
with a Thin Provisioning volume (V-VOL).
10608703122
WCheck the setting of depletion threshold
and warning threshold, then retry the
operation.
The depletion threshold is set lower than
the warning threshold.
10609003122
WCheck the setting of warning threshold,
then retry the operation.
The warning threshold is not input.10609103122
WCheck the setting of the depletion
threshold, then retry the operation.
The depletion threshold is not input.10609303122
WTo continue the processing, click [OK].
Otherwise, click [Cancel].
More than one volume type (drive type,
RAID level, or internal/external volume)
10609403122
is used between the LDEVs selected for
the pool volumes. When different volume
types are used together in the same pool,
the performance will be impacted by the
lowest performing volume type. Confirm
that the selected LDEVs with a mix of
volume types are OK.
106 Message (part code group 3nnn)