HP P9000 RAID Manager User Guide

Table 10 Commands and operation authority managed by Remote Web Console and SVP (continued)
Executable commandAuthorityOperation targetOperation
pairsplit -SAuto LUN pair deletion
authority
paircreatePair creation authorityRemote copy
pairsplit -SPair deletion authority
raidcom add pathExternal path setting authorityExternal VolumeAttribute change
raidcom modify poolPool setting authorityPool
raidcom modify port
-port_attribute
Port attribute setting authorityPort
Port setting authority
• raidcom modify port
-loop_id
• raidcom modify port
-topology
• raidcom modify port
-port_speed
raidcom add host_grpHost group setting authorityHost group
WWN setting authorityWWN
• raidcom set hba_wwn
• raidcom reset hba_wwn
raidcom modify ldev
-ldev_name
LDEV nickname setting
authority
LDEV nickname
pairresyncPairsplit and resync authorityLocal copy
Environment construction
authority
Remote copy
• raidcom add rcu
• raidcom delete rcu
• raidcom modify rcu
• raidcom add rcu_path
• raidcom delete rcu_path
• raidcom add journal
• raidcom delete journal
• raidcom modify journal
pairresyncPairsplit and resync authority
The relationship between resource groups and command operations
The operation for using resource groups are different by the command devices (the In-Band method)
or the Out-of-Band method that are used when you start RAID Manager.
You can create resource groups for each resource. And you can share them with multiple users.
When user 10 and user 20 share the port like the following figure, the relation between the
command devices and resource groups that user can use is like Table 11 (page 54).
The relationship between resource groups and command operations 53