HP P9000 RAID Manager User Guide
Table 75 SSB codes that are returned by raidcom add thp_pool command (continued)
raidcom add thp_pool
DescriptionError codeExecuting/
Asynchronous
Error message
SSB2SSB1
It cannot be used as a pool volume because the size of specified
LDEV is less than 8GB.
00382E30AsynchronousGet Command Status
The specified LDEV is used as a V-VOL.005C2E30AsynchronousGet Command Status
The specified LDEV is a volume of unsupported Smart Tiers.005D2E30AsynchronousGet Command Status
The specified LDEV is used in another program product.005E2E30AsynchronousGet Command Status
An LDEV, whose emulation type is not available to be mixed,
is in the specified LDEVs.
006C2E30ExecutingCMDRJE
The operation cannot be done for the following reasons:006E2E30AsynchronousGet Command Status
• The pool volumes to be added to the Smart Tiers pool include
external volumes whose cache modes are invalid.
• The Thin Provisioning pool includes both external volumes
whose cache modes are invalid and internal volumes.
The resource group ID of the specified volume cannot be
registered because the resource group ID is different from the
00712E30Executing
Asynchronous
CMDRJE
Get Command Status
resource group ID of the other pool volume in the specified pool
ID.
The specified LDEV cannot be operated because it is an external
volume mapped for online data migration.
00742E30AsynchronousGet Command Status
The threshold value 1 is out of range.60002E30ExecutingCMDRJE
The specified pool attribute differs from the pool attribute of
existed pool.
60042E30AsynchronousGet Command Status
The RAID level of the specified LDEV is different with the RAID
level of others.
00152E31AsynchronousGet Command Status
There is a blocked pool volume.00162E31AsynchronousGet Command Status
External volumes whose cache modes are different are included.00182E31AsynchronousGet Command Status
The POOL Name is duplicated with another pool.60012E31ExecutingCMDRJE
The pool cannot include volumes in different RAID levels because
the pool cannot include those volumes. Or the pool cannot
60042E31AsynchronousGet Command Status
include the RAID 1 volumes and the volumes of other RAID levels
together.
The pool cannot include both internal volumes and external
volumes because the pool is not set to Mixable.
60052E31AsynchronousGet Command Status
The usage capacity exceeds the license capacity of program
product.
90002E31AsynchronousGet Command Status
The command cannot be accepted. After a while, execute the
same command.
00EE2EE7ExecutingCMDRJE
An internal error occurred.FEEC2EE7ExecutingCMDRJE
Call HP Technical Support.AsynchronousGet Command Status
Error messages and error codes 229