HP P9000 RAID Manager User Guide

Table 72 SSB codes that are returned by raidcom add snap_pool command (continued)
raidcom add snap_pool
DescriptionError codeExecuting/
Asynchronous
Error message
SSB2SSB1
The larger number of drive types than the supported
configuration cannot be added to the specified pool.
000D2E22AsynchronousGet Command Status
Pool volume cannot be registered because the drive type of
specified LDEV is different from the other pool volume type, or
the drive type in the pool exceeds the three.
61002E22AsynchronousGet Command Status
The emulation type of specified LDEV cannot be used as a pool
VOL.
00002E30AsynchronousGet Command Status
The specified LDEV has the LU path definition.00072E30AsynchronousGet Command Status
The specified LDEV is used as a External Storage Access
Manager quorum disk.
000C2E30AsynchronousGet Command Status
The specified LDEV is used as a system disk.000D2E30AsynchronousGet Command Status
The specified LDEV is already used as a pool volume.000E2E30AsynchronousGet Command Status
The specified LDEV is a command device.00102E30AsynchronousGet Command Status
It cannot be used as a pool volume because the size of specified
LDEV is less than 8GB.
00382E30AsynchronousGet Command Status
Creating a pool or adding a pool volume cannot be done
because CLPR is mixed in the specified pool.
00392E30AsynchronousGet Command Status
The specified LDEV is used as a V-VOL.005C2E30AsynchronousGet Command Status
The specified LDEV is a volume of unsupported Smart Tiers.005D2E30AsynchronousGet Command Status
The specified LDEV is used in another program product.005E2E30AsynchronousGet Command Status
An LDEV, whose emulation type is not available to be mixed,
is in the specified LDEVs.
006C2E30ExecutingCMDRJE
The resource group ID of the specified volume cannot be
registered because the resource group ID is different from the
00712E30Executing
Asynchronous
CMDRJE
Get Command Status
resource group ID of the other pool volume in the specified pool
ID.
The specified LDEV cannot be operated because it is an external
volume mapped for online data migration.
00742E30AsynchronousGet Command Status
The threshold value 1 is out of range.60002E30ExecutingCMDRJE
The specified pool attribute differs from the pool attribute of
existed pool.
60042E30AsynchronousGet Command Status
The RAID level of the specified LDEV is different from the RAID
level of the other pool volumes.
00152E31AsynchronousGet Command Status
There is a blocked pool volume.00162E31AsynchronousGet Command Status
The POOL Name is duplicated with another pool.60012E31ExecutingCMDRJE
The usage capacity exceeds the license capacity of program
product.
90002E31AsynchronousGet Command Status
An internal error occurred.FEEC2EE7ExecutingCMDRJE
Call HP Technical Support.AsynchronousGet Command Status
226 Troubleshooting