HP P9000 RAID Manager User Guide

Table 67 SSB codes that are returned by raidcom delete lun command (continued)
raidcom delete lun
DescriptionError codeExecuting/
Asynchronous
Error message
SSB2SSB1
Another LDEV is already mapped in the specified LUN.09A1B958ExecutingCMDRJE
The command device is being used in the local RAID Manager.B9F9B9F9ExecutingCMDRJE
Table 68 SSB codes that are returned by raidcom add lun command
raidcom add lun
DescriptionError codeExecuting/
Asynchronous
Error message
SSB2SSB1
An invalid LDEV exists in the specified LDEVs.00142EF6ExecutingCMDRJE
LUN path cannot be set because it is reserved for Auto LUN.0101B958ExecutingCMDRJE
The attribute of the specified port is Initiator or External.0150B958ExecutingCMDRJE
The other than HMDE volume or OPEN volume is included in
the specified LDEV.
0155B958ExecutingCMDRJE
An LU path has already defined in the relevant LDEV.015AB958ExecutingCMDRJE
An invalid LDEV exists in the specified LDEVs.015DB958ExecutingCMDRJE
It exceeds the maximum LUN under the port.015EB958ExecutingCMDRJE
LDEV is set as a pool volume.0178B958ExecutingCMDRJE
LUN path cannot be set because the LDEV is a system disk.017BB958ExecutingCMDRJE
LUN path cannot be set because the LDEV is a journal volume.017CB958ExecutingCMDRJE
LUN path cannot be set because the access attribute of LDEV
Data Retention is reserved.
017DB958ExecutingCMDRJE
LUN path cannot be set because the access attribute of LEV Data
Retention is different with the R/W permissions.
017EB958ExecutingCMDRJE
When the host mode is External Storage(0x4C), the LUN path
cannot be set in the other than the external volume.
01A3B958ExecutingCMDRJE
The LU path definition cannot be set because it specifies more
than one different resource groups.
01F2B958ExecutingCMDRJE
Command device cannot be set because it is reserved for Auto
LUN.
0601B958ExecutingCMDRJE
Command device cannot be set because it is an Business Copy
pair/or it is reserved.
0606B958ExecutingCMDRJE
The command device cannot be released because it is used at
the local RAID Manager.
0639B958ExecutingCMDRJE
A command device cannot be set because LDEV is other than
the OPEN volume.
064AB958ExecutingCMDRJE
The specified LDEV is not installed.065DB958ExecutingCMDRJE
A command device cannot be set because LDEV is the virtual
volume of Snapshot.
0679B958ExecutingCMDRJE
The value of LUN exceeds the maximum.0944B958ExecutingCMDRJE
The value of LDEV exceeds the maximum.0945B958ExecutingCMDRJE
Error messages and error codes 221