HP P9000 RAID Manager User Guide

Table 62 SSB codes that are returned by raidcom modify ldev -status nml command (continued)
raidcom modify ldev -status nml
DescriptionError codeExecuting/
Asynchronous
Error message
SSB2SSB1
LDEV cannot be restored because there is no connection path
to the normal external path.
00172E31AsynchronousGet Command Status
The command cannot be accepted. After a while, execute the
same command.
00EE2EE8ExecutingCMDRJE
Table 63 SSB codes that are returned by raidcom modify ldev -status blk command
raidcom modify ldev -status blk
DescriptionError codeExecuting/
Asynchronous
Error message
SSB2SSB1
It exceed the range of LDEV number.00002E00ExecutingCMDRJE
The specified LDEV is used as a pair of Business
Copy/Compatible FlashCopy/Snapshot/Auto LUN V2.
00002E10AsynchronousGet Command Status
The specified LDEV is used for a pair of Continuous Access
Synchronous or Continuous Access Journal.
00012E10AsynchronousGet Command Status
The specified LDEV is used as a Compatible FlashCopy pair.00032E10AsynchronousGet Command Status
The specified LDEV is used as a Snapshot pair.00042E10AsynchronousGet Command Status
The specified LDEV is used as a system disk.00082E10AsynchronousGet Command Status
LDEV is not installed, or LDEV is not in the state of Normal.00112E10ExecutingCMDRJE
The specified LDEV is used at the concurrent copy or XRC.00122E10AsynchronousGet Command Status
The operation cannot be done because LDEV is now expanding.00092E11AsynchronousGet Command Status
The operation cannot be done because the virtual disk space is
blocked.
001E2E11AsynchronousGet Command Status
The specified LDEV is used in another operation.00532E11ExecutingCMDRJE
The parity group or the external group to which the specified
LDEV belongs is used in another operation.
01532E11ExecutingCMDRJE
The command cannot be accepted. After a while, execute the
same command.
94002E11ExecutingCMDRJE
The specified LDEV is not installed.00002E20ExecutionCMDRJE
The specified LDEV is used as a Thin Provisioning.000A2E30AsynchronousGet Command Status
The specified LDEV is used as a pool volume.000E2E30AsynchronousGet Command Status
It is used as a journal.000F2E30ExecutingCMDRJE
The specified LDEV is used as a reserved volume of Auto LUN
V2.
00142E30AsynchronousGet Command Status
Volume Security for Mainframe is set to the specified LDEV.001A2E30AsynchronousGet Command Status
It is used as a remote command device.001C2E30AsynchronousGet Command Status
It is a volume that the Data Retention is set.004E2E30AsynchronousGet Command Status
The specified LDEV is a Data Retention/Volume Retention
attribute device.
004E2E30AsynchronousGet Command Status
218 Troubleshooting