HP P9000 RAID Manager User Guide

Table 61 SSB codes that are returned by raidcom modify ldev -ssid command
raidcom modify ldev -ssid
DescriptionError codeExecuting/
Asynchronous
Error message
SSB2SSB1
SSID cannot be changed because there are LDEVs in the
boundary where the specified LDEV belongs.
00232E11ExecutingCMDRJE
The specified SSID is used for the other boundary.72012E22ExecutingCMDRJE
An internal error occurred. Call HP Technical Support.FEEC2EE8ExecutingCMDRJE
Table 62 SSB codes that are returned by raidcom modify ldev -status nml command
raidcom modify ldev -status nml
DescriptionError codeExecuting/
Asynchronous
Error message
SSB2SSB1
It exceeds the range of LDEV number.00002E00ExecutingCMDRJE
The specified LDEV is used as a Business Copy pair.00002E10AsynchronousGet Command Status
The specified LDEV is used as a Continuous Access Synchronous
pair or a Continuous Access Journal pair.
00012E10AsynchronousGet Command Status
The specified LDEV is used as a Compatible FlashCopy pair.00032E10AsynchronousGet Command Status
The specified LDEV is used as a Snapshot pair.00042E10AsynchronousGet Command Status
The specified LDEV is used as a system disk.00082E10AsynchronousGet Command Status
LDEV is not blocked.00102E10ExecutingCMDRJE
The specified LDEV is a CC/XRC attribute device.00122E10AsynchronousGet Command Status
The specified LDEV is not formatted after it is used as the journal
volume.
001E2E10AsynchronousGet Command Status
The operation cannot be done because LDEV is not expanding.00092E11AsynchronousGet Command Status
The operation cannot be done because the virtual disk space is
blocked.
001E2E11AsynchronousGet Command Status
The specified LDEV is used in another operation.00532E11ExecutingCMDRJE
The parity group or the external group to which the specified
LDEV belongs is used in another operation.
01532E11ExecutingCMDRJE
The operation of Thin Provisioning V-VOL cannot be done
because there is a blocked pool volume.
60062E11AsynchronousGet Command Status
The command cannot be accepted. After a while, execute the
same command.
94002E11ExecutingCMDRJE
The specified LDEV is not installed.00002E20ExecutingCMDRJE
The specified LDEV is used as a Thin Provisioning.000A2E30AsynchronousGet Command Status
The specified LDEV is used as a pool volume.000E2E30AsynchronousGet Command Status
The specified LDEV is used as a reserved volume of Auto LUN.00142E30AsynchronousGet Command Status
Volume Security for Mainframe is set to the specified LDEV.001A2E30AsynchronousGet Command Status
The specified LDEV is a Data Retention/Volume Retention
attribute device.
004E2E30AsynchronousGet Command Status
Error messages and error codes 217