HP P9000 RAID Manager User Guide

Table 59 SSB codes that are returned by raidcom initialize ldev command (continued)
raidcom initialize ldev
DescriptionError codeExecuting/
Asynchronous
Error message
SSB2SSB1
The parity group of the target LDEV is in the state of correction
copy.
01022E11AsynchronousGet Command Status
The parity group or the external volume group to which the
specified LDEV belongs is used in another operation.
01532E11ExecutingCMDRJE
The operation of Thin Provisioning V-VOL cannot be done
because there is a blocked pool.
60042E11AsynchronousGet Command Status
The operation of Thin Provisioning V-VOL cannot be done
because there is a blocked pool volume.
60062E11AsynchronousGet Command Status
The command cannot be accepted. After a while, execute the
same command.
94002E11ExecutingCMDRJE
The processing stopped because aborting processing is required.00002E14AsynchronousGet Command Status
LDEV is not installed.00002E20ExecutingCMDRJE
It exceeds the maximum value of parity group that can be
executed the quick format at a time.
01002E22AsynchronousGet Command Status
The specified LDEV is used as a Thin Provisioning.000A2E30AsynchronousGet Command Status
The specified LDEV is used as a pool volume.000E2E30AsynchronousGet Command Status
The specified LDEV is used as a journal volume.000F2E30AsynchronousGet Command Status
Volume Security for Mainframe is set to the specified LDEV.001A2E30AsynchronousGet Command Status
Quick format cannot be done because the target LDEV is not an
internal volume.
002D2E30AsynchronousGet Command Status
The specified LDEV is a Data Retention/Volume Retention
attribute device.
004E2E30AsynchronousGet Command Status
The specified LDEV is a pool volume and the pool volume include
the Thin Provisioning volume that is not in the blocked status.
00612E30AsynchronousGet Command Status
The specified LDEV cannot be operated because it is an external
volume mapped for online data migration.
00742E30AsynchronousGet Command Status
Maintenance work cannot be performed because the target
LDEV is a ESAM Quorum disk.
00012E31AsynchronousGet Command Status
LDEV cannot be formatted because there is no normal external
path.
00172E31AsynchronousGet Command Status
The command cannot be accepted. After a while, execute the
same command.
00EE2EE8ExecutingCMDRJE
An internal error occurred.0A182EE8AsynchronousGet Command Status
An internal error occurred.FEEC2EE8ExecutingCMDRJE
Call HP Technical Support.AsynchronousGet Command Status
The specified parameter is incorrect. Check the HP P9000 RAID
Manager Reference Guide.
00022EF3ExecutingCMDRJE
Error messages and error codes 215