HP P9000 RAID Manager User Guide
Table 46 SSB codes that are returned by raidcom disconnect external_grp command (continued)
raidcom disconnect external_grp
DescriptionError codeExecuting/
Asynchronous
Error message
SSB2SSB1
Call HP Technical Support.
An internal error occurred by the operation of external volume.09052EDAExecutingCMDRJE
Call HP Technical Support.
Table 47 SSB codes that are returned by raidcom modify external_grp command
raidcom modify external_grp
DescriptionError codeExecuting/
Asynchronous
Error message
SSB2SSB1
The external volume group is not in the effective range.41002E00ExecutingCMDRJE
The specified MP Blade is blocked.83002E10ExecutingCMDRJE
The attribute cannot be changed because Auto LUN is being
executed.
41072E11ExecutingCMDRJE
There is no external volume group.41002E20ExecutingCMDRJE
The specified MP Blade is not installed.83002E20ExecutingCMDRJE
Cache mode cannot be changed because there is an LDEV that
Cache Residency bind mode is set.
000C2E31ExecutingCMDRJE
Cache mode cannot be changed because the specified external
volume includes a pool volume or an LDEV that is used by LUSE.
41012E31ExecutingCMDRJE
The cache mode cannot be changed because one of the
following applies to the specified external volume.
41072E31ExecutingCMDRJE
• A pool volume of the pool that consists of both external
volumes and internal volumes.
• A pool volume of the pool where the multi tier pool option
is enabled.
The attribute of the external volume cannot be changed from
the current cache mode to the specified cache mode.
41082E31ExecutingCMDRJE
The attribute cannot be changed because the external volume
group is not mapped for online data migration.
41092E31ExecutingCMDRJE
An internal error occurred on the changing of an external volume
option.
09052EDAExecutingCMDRJE
Call HP Technical Support.
Table 48 SSB codes that are returned by raidcom modify port -loop_id command
raidcom modify port -loop_id
DescriptionError codeExecuting/
Asynchronous
Error message
SSB2SSB1
The specified AL-PA is invalid.044CB955ExecutingCMDRJE
The specified topology is invalid.054EB955ExecutingCMDRJE
The other than "fabric on" cannot be specified when specifying
a topology of the package for Fibre Channel over Ethernet.
05A6B955ExecutingCMDRJE
204 Troubleshooting