HP P9000 RAID Manager Reference Guide (T1610-96037, October 2011)

Capacity(MB): Displays the total capacity in the Snapshot/Thin Provisioning pool.
Seq#: Displays the serial number of the RAID storage system.
Num: Displays the number of LDEV configured the Snapshot/Thin Provisioning pool.
LDEV#: Displays the first number of LDEV configured the Snapshot/Thin Provisioning pool.
H(%): Displays the threshold rate being set to the Snapshot/Thin Provisioning pool as High water
mark. ‘Unknown’ is shown as ‘-’.
Example 2: raidvchkscan command example with the -v pida option
# raidvchkscan -v pida 0
PID POLS U(%) AV_CAP(MB) TP_CAP(MB) W(%) H(%) Num LDEV# LCNT TL_CAP(MB)
001 POLN 10 45000000 50000000 50 80 2 265 33 65000000
002 POLF 95 10000 100000000 50 80 3 270 900 100000000
004 POLN 0 10000000 100000000 80 90 2 280 0 0
Output of the raidvchkscan command with -v pida option:
PID: Displays the Thin Provisioning pool ID.
POLS: Displays the status of the Thin Provisioning pool:
POLN = “Pool Normal”
POLF = “Pool Full”
POLS = “Pool Suspend”
POLE = “Pool failure”. In this state, information for the pool cannot be displayed.
U(%): Displays the usage rate of the Thin Provisioning pool.
AV_CAP(MB): Displays the available capacity for the Thin Provisioning volumes mapped to this
pool.
TP_CAP(MB): Displays the total capacity of the Thin Provisioning pool.
W(%): Displays the threshold rate for “WARNING” set for this Thin Provisioning pool.
H(%): Displays the threshold rate set for the Thin Provisioning pool as high water mark.
Num: Displays the number of LDEVs configured the Thin Provisioning pool.
LDEV#: Displays the first number of LDEV configured the Thin Provisioning pool.
LCNT: Displays the total number of Thin Provisioning volumes mapped to this Thin Provisioning
pool.
TL_CAP(MB): Displays the total capacity of all Thin Provisioning volumes mapped to this Thin
Provisioning pool.
horcmstart
The horcmstart command is a shell script that starts the HORCM application (/etc/horcmgr). This
shell script also sets the environment variables for HORCM as needed (For example,
HORCM_CONF, HORCM_LOG, HORCM_LOGS).
Syntax
horcmstart.sh { inst ... } (UNIX systems)
horcmstart.exe { inst ... } (Windows systems)
Options and parameters
DescriptionOption
Specifies the HORCM instance number (numerical value). When this option is specified, the horcmstart
shell script sets the environment variables (HORCMINST, HORCM_CONF, HORCM_LOG,
inst
HORCM_LOGS) corresponding to the instance number, and starts the specified HORCM instance.
horcmstart 87