HP P9000 RAID Manager Reference Guide (T1610-96037, October 2011)

DescriptionOption
Designates the time interval in seconds.-s [interval] or
-sm [interval]
Interprets the time interval as seconds.-s
Interprets the time interval as minutes.-sm
Designates the time interval value (1 to 60). If not specified, the default interval (3) is used.[ interval]
Designates number of repeats. When omitted, this command repeats until CNTL-C.[count]
Returned values
None
Error codes
None
Examples
An example of the raidar command and its output follows.
raidar command example
# raidar -p cl1-a 15 6 -p cl1-b 14 5 -p cl1-a 12 3 -s 3
TIME[03]PORTTLVOLSTATUSIOPSHIT(%)W(%)IOCNT
13:45:25---------
13:45:28CL1-A156SMPL---200.080.040.0600
CL1-B145P-VOLPAIR133.335.013.4400
CL1-A123P-VOLPSUS200.035.040.6600
Output of the raidar command:
IOPS: # of I/Os (read/write) per second (total I/O rate).
HIT(%): Hit rate for read I/Os (read hit rate).
W(%): Ratio of write I/Os to total I/Os (percent writes).
IOCNT: Number of write and read I/Os.
raidqry
The raidqry command (RAID query) displays the configuration of the connected host and RAID
storage system.
Syntax
raidqry { -h | -q | -z | -I[H][M][instance#] or I[CA][BC][instance#]
| -l | -r <group> | [ -f ] | -g}
Options and parameters
DescriptionOption
Displays Help/Usage and version information.-h
Terminates the interactive mode and exits the command.-q
Makes the raidqry command enter the interactive mode. The -zx option guards performing of the
HORCM in the interactive mode. When this option detects a HORCM shutdown, interactive mode
terminates.
-z or -zx
OpenVMS cannot use the -zx option.
68 Replication commands