HP P9000 RAID Manager Reference Guide (T1610-96037, October 2011)

TARG: Displays the target ID (which was converted by the fibre conversion table).
LUN: Displays the LUN (which was converted by the fibre conversion table).
SERIAL: Displays the production (serial#) number of the RAID storage system.
LDEV: Displays the LDEV# within the RAID storage system.
PRODUCT_ID: Displays product-id field in the STD inquiry page.
raidar
The raidar command displays configuration, status, and I/O activity information for the specified
port/TID(s)/device(s) at the specified time interval. The configuration information is acquired directly
from the storage system (not from the configuration definition file).
The I/O activity of a Continuous Access Synchronous S-VOL in the COPY or PAIR state includes
Continuous Access Synchronous remote I/Os (update copy operations) in addition to host-requested
I/Os. The I/O activity of a Business Copy S-VOL in the COPY or PAIR state includes only
host-requested I/Os (Business Copy update copy operations are excluded). The I/O activity of a
P-VOL or simplex volume includes only host-requested I/Os. If state changed into SMPL in S-VOL
(COPY, PAIR) I/O actively, and then I/O activity of the between is reported in the SMPL state.
Syntax
raidar { -h | -q | -z | -I[H][M][instance#] or I[CA][BC][instance#]
| -p <port> <targ> <lun> | -pd[g] <raw_device
| -s [interval] [count] }
Options and parameters
DescriptionOption
Displays Help/Usage and version information.-h
Terminates the interactive mode and exits the command.-q
Makes the raidar command enter the interactive mode. The -zx option guards performing of the
HORCM in the interactive mode. When this option detects a HORCM shut down, interactive mode
terminates.
-z or -zx
OpenVMS cannot use the -zx option.
Specifies the command as [HORC]/[HOMRCF] or [Continuous Access Synchronous]/[Business Copy],
and used when specifying the RAID Manager instance number.
-I[H][M]
[instance#]
or
-I[CA][BC]
[instance#]
Monitors one or more (up to 16) devices at a time.
• <port>: Specifies the port to be reported: CL1-A to CL1-R and CL2-A to CL2-R (excluding CL1-I,
CL1-O, CL2-I, CL2-O).
For XP24000/XP20000 Disk Array: CL3-a to CL3-r, or CLG-a to CLG-r for the expanded port.
-p <port>
<targ> <lun>
[mun]....
For XP12000 Disk Array: CL3-a to CL3-r, or CLG-a to CLG-r for the expanded port.
For XP10000 Disk Array: CL3-a to CL3-h, or CL8-a to CL8-h for the expanded port.
For XP1024/XP128 Disk Array: CL3-a to CL3-r, or CL4-a to CL4-r for the expanded port.
The port is not case sensitive (e.g. CL1-A= cl1-a= CL1-a= cl1-A, CL3-a= CL3-A= cl3-a= cl3-A).
• <targ>: Specifies the SCSI TID (0 to 15) of the specified port.
• <lun>: Specifies the LUN (0 to 7) on the specified TID.
• [mun]: Specifies the MU number of the specified LUN (Business Copy only).
Allows designation of an LDEV by raw device file name. The -pdg option is used to show a LUN on
the host view by finding a host group (XP1024/XP128 Disk Array and later).
-pd[g]
<raw_device>
raidar 67