HP P9000 RAID Manager Reference Guide (T1610-96037, October 2011)

DescriptionOption
(3) Sync has the following behavior on any conditions:
• If the logical drive which corresponds to a [-g name] is not open by any applications, then sync
flushes the system buffer to a drive and makes the dismount state for this drive.
• If the logical drive which corresponds to a [-g name] is already opened by any applications, then
sync flushes only the system buffer to a drive. This is allowed to flush the system buffer before
pairsplit without unmounting the P-VOL (opening state), and indicates the behavior as [FLUSH]
below:
[FLUSH] : ORA ORA_000[-] -> \Vol44\Dsk0 : Volume{56e4954a-28d5-4824-a408-3ff9a6521e5d}
Returned values
None
Error codes
None
Examples
raidscan command examples for fibre-channel ports
# raidscan -p cl1-r
PORT#/ALPA/C,TID#,LU#Num(LDEV#...)P/S,Status,Fence,LDEV#,P-Seq#P-LDEV#
CL1-R/ ce/15,15, 7 5(100,101..)P-VOLPAIRNEVER100,5678 200
CL1-R/ ce/15,15, 6 5(200,201..)SMPL---------------- -----
# raidscan -p cl1-r -f
PORT#/ALPA/C,TID#,LU#Num(LDEV#...)P/S,Status,Fence,LDEV#,Vol.Type
CL1-R/ ce/15,15, 7 5(100,101..)P-VOLPAIRNEVER100,OPEN-3
CL1-R/ ce/15,15, 6 5(200,201..)SMPL------------OPEN-3
Example of the -find option for raidscan
# ls /dev/rdsk/* | raidscan -find
DEVICE_FILE UID S/F PORT TARG LUN SERIAL LDEV PRODUCT_ID
/dev/rdsk/c0t0d4 0 S CL1-M 0 4 31168 216 OPEN-3-CVS-CM
/dev/rdsk/c0t0d1 0 S CL1-M 0 1 31168 117 OPEN-3-CVS
/dev/rdsk/c1t0d1 - - CL1-M - - 31170 121 OPEN-3-CVS
Output of the raidscan command:
Port#, ALPA/C, TID#, LU#: Port ID, arbitrated loop physical address, TID, LUN.
For Business Copy, raidscan displays MU# for each LUN (e.g., LUN 7-0, 7-1, 7-2).
Num(LDEV#…): Number of LDEVs and LDEV ID for the LUSE volume.
P/S: Volume attribute.
Status: Status of the paired volume.
Fence: Fence level (Continuous Access Synchronous only).
P-Seq#: Serial # of the storage system which contains the partner volume of the pair.
P-LDEV#: LDEV number of the partner volume of the pair.
Vol.Type: Logical unit (LU) type (For example, OPEN-V, OPEN-9).
Group: Group name (dev_group) as described in the configuration definition file.
UID: Displays the unit ID for multiple storage system configuration. If UID appears as ‘-’, the
command device for HORCM_CMD is not found.
S/F: Displays whether a port is SCSI or fibre.
PORT: Displays the RAID storage system port number.
66 Replication commands