HP P9000 RAID Manager Reference Guide (T1610-96037, October 2011)

Options and parameters
DescriptionOption
Displays Help/Usage and version information.-h
Terminates the interactive mode and exits the command.-q
Makes the paircurchk command enter the interactive mode. The -zx option guards performing of the
HORCM in the interactive mode. When this option detects a HORCM shutdown, interactive mode
terminates.
-z or -zx
OpenVMS cannot use the -zx option.
Specifies the command as [HORC]/[HOMRCF] or [Continuous Access Synchronous]/[Business Copy],
and used when specifying the RAID Manager instance number.
-I[H][M]
[instance#]
or
-I[CA][BC]
[instance#]
Specifies a group name defined in the configuration definition file. The command is executed for the
specified group unless the -d <pair Vol> option is specified.
-g <group>
Specifies paired logical volume name defined in the configuration definition file. When this option
is specified, the command is executed for the specified paired logical volume.
-d <pair Vol>
Searches a group on the configuration definition file (local instance) for the specified raw_device,
and if the specified raw_device is contained in the group, the target volume is executed as the paired
-d[g]
<raw_device>
[MU#] logical volume (-d) or group (-dg). This option is effective without specification of “-g <group>“ option.
If the specified the raw_device is contained in two or more groups, the command is executed on the
first group.
Searches a group on the configuration definition file (local instance) for the specified LDEV, and if
the specified LDEV is contained in the group, the target volume is executed as the paired logical
-d[g] <seq#>
<LDEV#> [MU#]
volume (-d) or group (-dg). This option is effective without specification of “-g <group>“ option. If the
specified LDEV is contained in two or more groups, the command is executed on the first group. The
<seq #> <LDEV #> values can be specified in hexadecimal (by addition of “0x “) or decimal notation.
Suppresses messages to be displayed when this command is executed. This option must be specified
at the beginning of a command argument. The command execution log is not affected by this option.
-nomsg:
Returned values
The paircurchk command sets the following returned values during exit, allowing you to check the
execution results.
Normal termination (data is consistent): 0
Abnormal termination: Other than 0, see the execution logs for error details.
Error codes
The following table describes the error codes for the paircurchk command. Unrecoverable errors
are fixed and are not resolved, even after re-executing the command. If the command fails, the
detailed status is logged in the RAID Manager command log ($HORCC_LOG), even if the user
script has no error handling.
Table 17 Specific error code for paircurchk
ValueRecommended actionError messageError codeCategory
225Check volume list to see if an operation was
directed to the wrong S-VOL.
S-VOL currency errorEX_VOLCURVolume status
Unrecoverable
58 Replication commands