HP P9000 RAID Manager Reference Guide (T1610-96037, October 2011)

DescriptionOption
-I[CA][BC]
[instance#]
Specifies the group name defined in the configuration definition file. This option must always be
specified. The command is executed for the specified group unless the -d <pair Vol> option is
specified.
-g <group>
This option is used to specify the paired logical volume name defined in the configuration definition
file. When this option is specified, the command is executed for the specified paired logical volumes.
-d <pair Vol>
Searches a group on the configuration definition file (local instance) for the specified raw_device,
and if the specified raw_device is contained in the group, the target volume is executed as the paired
-d[g]
<raw_device>
[MU#] logical volume (-d) or group (-dg). This option is effective without specification of “-g <group>“ option.
If the specified the raw_device is contained in two or more groups, the command is executed on the
first group.
Forcibly specifies a cascading Continuous Access Synchronous volume for specified pair logical
volumes on Business Copy environment. If the -l option is specified, this option displays status of a
- FHORC [MU#]
or -FCA [MU#]
cascading Continuous Access Synchronous volume on a local host (near site). If no -l option is
specified, this option displays status of a cascading Continuous Access Synchronous volume on a
remote host (far site). This option cannot be specified with -m <mode> option on the same command
line.
Forcibly specifies a cascading Business Copy volume for specified pair logical volumes on Continuous
Access Synchronous environment. If the -l option is specified, this option displays status of a cascading
-FMRCF [MU#]
or -FBC [MU#]
Business Copy volume on a local host (near site). If no -l option is specified, this option displays status
of a cascading Business Copy volume on a remote host (far site). This option cannot be specified
with -m <mode> option on the same command line.
Searches a group on the configuration definition file (local instance) for the specified LDEV, and if
the specified LDEV is contained in the group, the target volume is executed as the paired logical
-d[g] <seq#>
<LDEV#> [MU#]
volume (-d) or group (-dg). This option is effective without specification of “-g <group>“ option. If the
specified LDEV is contained in two or more groups, the command is executed on the first group. The
<seq #> <LDEV #> values can be specified in hexadecimal (by addition of “0x “) or decimal notation.
Checks the configuration of the paired volume connection path (physical link of paired volume among
the servers) and displays illegal pair configurations. If this option is not specified, the status of the
specified paired volume is displayed without checking the path configuration.
-c
Displays the paired volume status of the local host (which issues this command).-l
Displays the LDEV ID as a hexadecimal number.-fx
Displays copy operation progress, sidefile percentage, bitmap percentage, or Cnt Ac-J journal
percentage. Displays PFUL/PFUS for Continuous Access Asynchronous/Cnt Ac-J. Used to confirm
SSWS state as indication of S-VOL_SSUS-takeover after.
-fc
Displays the relation between the Device_File and the paired volumes, based on the group (as defined
in the local instance configuration definition file). If Device_File column shows “Unknown” to either
-fd
the local or the remote HOST (instance) then it shows a volume which is not recognized on own
HOST, and pair operation are rejected (except the local option such as “-l”) in protection mode.
Display example:
# pairdisplay -g oradb -fd Group PairVol(L/R) Device_File M
,Seq#,LDEV#.P/S,Status, Seq#,P-LDEV# M oradb oradev1(L) c0t3d0 0 35013
17..P-VOL COPY, 35013 18 - oradb oradev1(R) c0t3d1 0 35013 18..S-VOL
COPY, 35013 17 -
Displays the Bitmap mode to output of M column.-fm
Displays the serial# and LDEV# of the external LUNs mapped to the LDEV and additional information
for the pair volume. This option displays the information above by adding to last column, and then
-fe
ignores the format of 80 column. This option is invalid if the cascade options (-m all,-m cas) are
specified.
Display example for Continuous Access Synchronous:
pairdisplay 51