HP P9000 RAID Manager Reference Guide (T1610-96037, October 2011)

Example 4
The following shows examples of the pairvolchk command and its output.
# pairvolchk -g oradb
pairvolchk : Volstat is P-VOL.[status = PAIR fence = ASYNC CTGID = 2] <= Continuous Access Asynchronous
# pairvolchk -g oradb
pairvolchk : Volstat is P-VOL.[status = PAIR fence = DATA ] <= Continuous Access Synchronous
pairvolchk -g oradb
pairvolchk : Volstat is P-VOL.[status = PAIR ] <= Business Copy
# pairvolchk -g oradb
pairvolchk : Volstat is P-VOL.[status = PAIR CTGID = 1] <= Business Copy at-time split
Example 5
The following shows a pairvolchk example that acquires the status (P-VOL_PSUS) of the intermediate
P/Pvol through specified pair group on Business Copy environment. The following figure shows a
pairvolchk example that acquires the status (P-VOL_PSUS) of the intermediate S/Pvol (MU#1)
through specified pair group on Continuous Access Synchronous environment.
Figure 22 Example of -FHORC option for pairvolchk
Figure 23 Example of -FMRCF option for pairvolchk
The following table shows the truth table for pairvolchk group status display.
Table 15 Truth table for pairvolchk group status display
Group statusPAIRPFULPSUSPFUSPDUBPSUECOPY/RCPYOption
-Status of each volume in the group
COPY/RCPYxxxxxxTRUESee Notes
below
PSUExxxxxTRUEfalse
PDUBxxxxTRUEfalsefalse
PFUSxxxTRUEfalsefalsefalse
PSUSxxTRUEfalsefalsefalsefalse
pairvolchk 49